Truck Propeller Shaft Drive rubber CAMC Center Bearing

Truck Propeller Shaft Drive rubber CAMC Center Bearing

Truck Propeller Shaft Drive rubber Support Center Bearing for CAMC made in China professional

(1) The reason for the damage of the hanger bearing is the lack of lubricating oil in the bearing, which causes the bearing to wear or ablate and loosen, or because of disrepair for a long time, the outer diameter of the bearing and the seat hole are rotated loose, and the rubber ring around the bearing seat Cracking or falling off, etc., cause the drive shaft to jump in the hanger, causing the lower half of the hanger to break, the bolts to break, and the bolt joints to break.

(2) The cause of the damage of the transmission shaft components is the deformation of the front and rear transmission shafts, the universal joint shaft fork, the joint flange, and the extension joint keyway shaft, which causes the axis swing difference when the entire transmission shaft is driven; or the lack of slippage of the universal joint Excessive wear and looseness caused by oil; or aggravated wear and looseness between the sliding joint groove and the groove due to the expansion joint. When the whole set of transmission shafts are in transmission, the gap is increased and axis vibration occurs, and the center hanger is affected by the shock for a long time and the lower part is broken.

(3) The central hanger of the transmission shaft of the truck has kept the center bracket of the bearing seat (tile frame) type on the middle beam in the automobile since the 1940s. The material is casted with malleable cast iron (ma steel). This structure The hanger is only suitable for trucks with relatively low tonnage (some modern drive shaft center brackets are made of steel plate rolled and welded, and are fitted in the middle beam, which is more secure). The cast hanger is prone to fracture layer due to improper technology, loose metal or pores, and brittle material. During the warranty installation of the center hanger, due to the improper method of tightening the bolts, the hanger or hanger cover is not installed evenly and evenly, so that the hanger or hanger cover is tilted, and a certain point of stress is concentrated and breaks. The frame is broken.

Image description:



Company Introduction:
fast delivery

Stable supply & sincere service
Manufacturer of Center Bearing ,Engine Mounting,Strut Mounting,Torque Rod Bushing
Replacement parts for :TOYOTA, NISSAN, ISUZU, MITSUBISHI, SUZUKI, HINO, MAZDA,
BENZ, VOLVO, HOWO, IVECO, DAF, CHRYSLER, CHEVROLET, GM, FORD,MAN,,Scania,Renault,FAW,JAC,CAMC,HOWO,SACHMAN,HYUNDAI,FOTON,DONGFENGTRUCK ,NISSAN,KAMAZ,TRUCK RENAULT,GAZ, ect.

      Guangzhou Sub-Group Auto parts Co.,Ltd was established in 2000 and is located in baiyun district, Guangzhou, China. We have China's first-class truck auto parts professional capacity and export trade capacity. We have a strong and professional auto parts research team, professional control of product quality and suitable models. We supply high quality auto parts at the most competitive prices. Since its establishment, Sub-Group Auto parts has been dedicated to the production of all kinds of plastic parts for trucks, with perfect production capacity.

      In 2008, established the foreign trade department of auto parts, mainly operating Volvo, scania, FAW, weichai, cummins, dongfeng, American and Chinese auto parts and engineering machinery parts. We have the ability to develop new products that are not in our catalog, and we will do that in a timely manner and do our best to meet customer needs. Our production and development costs are very reasonable. Please contact us according to your special needs. We are glad to cooperate with you. At the same time, our highly skilled and qualified employees are proud to be a supplier of spare parts to global customers.

       We have a strong sourcing capability in the Chinese market. We fully understand the needs of our customers. We offer high quality products, competitive prices and first class service. We hope to establish good business relations and friendship with you in the near future.

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to Mid East(30.00%),Central America(20.00%),North America(10.00%),Eastern Asia(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),South America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?

Mercedes Benz, Man, Volvo, IVECO, DAF, SCANIA, Renault, Ford
FUSO, UD, NISSAN, HINO, ISUZU
FAW, CAMC, JAC, FOTON, DAYUN, DongFeng

CAT,CAT,Komatsu, Hyundai, Doosan, Hitachi, John Deere, Daewoo, Case, XCMG, Sany

4. why should you buy from us not from other suppliers?
1.Our company has 20 years experience in auto parts development and production. Main projects, China Heavy Truck: Weichai, FAW, Yuchai... and imported trucks: Mercedes-Benz, Volvo, MAN, Scandinavia... and construction machinery: Komatsu, Cummins, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German