COCO Powder Filling And Packing Machine 1.3kw Powder Bag Filling Machine 50x50x80cm

Technical parameters of servo screw:

1. Metering method: spiral rotary filling

2. Packaging weight: 50-800g (transform spiral accessories)

3. Packaging accuracy: ≤±0.3-1.5%

4. Packaging speed: 20-50bags /min

5. Power supply: three-phase four-wire 380V (or customized single-phase 220V)

6. Machine power: 1.3KW

Filling servo motor (Panasonic servo motor) MDMA1.8KW, torque 11.5n.m, stirring motor 400W.

7. Machine weight: 78Kg

Features:

A.PLC automatic control, touch screen operation, humanized control interface makes the operation and parameter setting simple and fast, and has error prompt and self-diagnosis functions.
B. The size of the package can be adjusted through the touch screen.
C. When the wrapping paper skin is used up, it will stop and alarm (the touch screen shows the reason for alarm). The machine is equipped with the packaging film docking device for ensuring the convenience and speed of paper skin replacement
D. The packing bag seal adopts the principle of heating and pressing. The heating temperature of horizontal seal and vertical seal can be adjusted independently and the temperature can be displayed.
E. On the control panel, there is an on-off button of compressed air, the machine will stop automatically when the air pressure is lower than the minimum set pressure, and the fault cause will be displayed;
3) Safety ensure: The machine is provided with a safety door. Open the safety door and the machine will stop automatically (set); At the same time, the machine is equipped with an emergency stop button to ensure the personal safety of the operator.
4) Simple maintenance: Simple structure design, low failure rate, less wearing parts, convenient maintenance.
5) Convenient cleaning: The machine is designed with the convenience of cleaning fully considered. All parts in contact with the materials to be packed can be removed quickly, installed quickly, and swabbed especially convenient;

Pictures of workshop

Warranty

All parts are under One Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and-tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part’s manufacturer or ROTY.