Good Price Drum Type Wire Armoring Machine 250/32+32 Bobbin From Real Manufacturer in China

Good Price Drum Type Wire Armoring Machine 250/32+32

1. Equipment characteristics

• unit is equipped with a human-machine interface, and various operating parameters can be displayed and set in real-time, which is intuitive and convenient.
• The actual rotational speed and traction line speed of each section of the twisted cage can be visually displayed.
• The meter wheel is equipped with rubber coating and pneumatic compression device, effectively improving the meter accuracy. It can be connected to the main control cabinet to set the meter parking.
• The disconnection position can be accurately displayed on the display screen of the operation cabinet, making it easy to find.
• 4The disconnection alarm signal is transmitted wirelessly, effectively avoiding confusion or failure of the transmission line.
• Adopting a cabinet type touch screen control console, it is easy to operate and has a beautiful form.
• The auxiliary reinforcement of the 5.7 host hinge adopts rectangular square tubes to avoid the shaking of the single board.
• The new belt type tensioning device adopts high wear-resistant friction blocks, making adjustment more convenient and has a longer lifespan.
• The internal cables and air ducts are hidden in the base square tube to avoid damage and disorder.
• Add reinforcement to the front bracket of the host to increase stability. The wire mold base is connected to the front bracket of the host, which has stronger integration and better mechanical rigidity.
• The front and rear axle heads of the main engine are made of integrated cast steel parts to avoid cracking caused by welding.
• has increased the area of the main engine brake area to improve braking performance.
• Surface polishing of traction wheels

2. Main Parameter

3.Operating directon: Equipment operation direction: Right head machine, facing device operation, left release line, right take-up line

4.Color:

• Rotating parts:RAL2004
• Main body:RAL5015
• Other parts:RAL7035

5.Main parts brand:

6. Document with machine

7. 32+32 main stranding cage

• Payoff reel specification: PND250
• Speed conversion level: 6 levels
• The second section of the hinge cage spindle is equipped with 24 single layer armor for twisting 48 steel wires.
• The frame adopts a whole plate bending and overall frame structure, with rectangular square tubes as support ribs, greatly increasing stability. The frame is welded and formed as a whole, tempered to eliminate stress, and then processed in one go on a dedicated dual turret lathe. The top shaft hole is processed on a CNC boring machine, and then subjected to dynamic balance verification to ensure high product concentricity, good running balance, and long-term deformation.
• The base is made of rectangular square tubes, welded as a whole, and processed on a gantry milling machine. The cables and high-pressure gas pipes inside the body are arranged in square tubes to effectively protect and reduce the clutter caused by cables.
• The gearbox adopts hard tooth surface grinding gears; Equipped with forward and reverse gears and neutral gears, each gearbox is equipped with a lubricating oil pump for forced lubrication.
• Electric worm gear clamping structure, automatic locking, easy to operate, fast, and safe; The turbine is supported by bearings, ensuring accurate positioning, less wear, and avoiding jamming.
• Equipped with the most advanced wireless, single disc, and pulse disconnection parking protection device, the system can stop and brake in a timely manner when the coil is completed or disconnected.
• The pay-off tension is controlled by mechanical friction with a "tension belt", manually adjusted, easy to operate, and less prone to malfunctions
• 4The hinge cage adopts pneumatic braking device to ensure multi-point synchronization. Enlarge the brake disc to improve braking performance. Each section of the hinge cage is equipped with a separate air storage tank to ensure braking effect.
• The front end of the host is equipped with a single line pre variant device.
• There is an emergency stop button in front of each section of the main engine, which is easy to operate.
• Install wear-resistant tungsten steel sleeves into each wire hole.
• Adding a wire barrel to the inner end of the twisted cage to effectively avoid scratching the wire core

Beyde Trading Co.,Ltd.(Know as Beyde) is the representative office for cable stranding machine factory(Built in 1995)in Hebei, China. BEYDE was set up to meet international business for those factories. One hour and a half hours from Tianjin Port, China, BEYDE keeps superior quality and competitive offers for global valued customers.

BEYDE Trading Co.,Ltd. is a manufacturer engaged in producing cable machines many years. The main products in our company including wire drawing equipments, cable stranding machine, strandingmachinery, plastics extruder and cable Reel drum. We always insists on using the best material to make the machine, so our machines are durable than general machine. We have a lot of customers who use our machine over than 20 years and still using now. Besides, We are makers by ourselves, not machine traders. Therefore, We sell to customers at a low price. We can design any types machine according to the demand of customers. We offer professional technique and services to our customers. Service overseas is provided by our company. We look forward to become your most valuable partner in the future. Let us create a wonderful future!

In 2019, due to the continuous increase of orders, the original production workshop could no longer meet the production requirements. Therefore, the management

of the company decided to repurchase a new piece of land of 10,000 square meters, and built the second processing plant in half a year. branch, and recruited 50

skilled workers, led by professional team personnel, and achieved good benefits, greatly relieving the pressure of production.

Beyde company is used for international advanced cable and wire processing equipment. In China, we are the only real manufacturers with independent processing and design capabilities.

The company produces 200-300 cable machines per year, especially pipe stranding machines, accounting for 60% of the Chinese market.