Product Details
Company Profile

99.9% Pure Nickel Cold Rolled Stainless Steel Coil 1250Mm Width BA Mirror Finish Grade 410 430

99.9% Pure Nickel Stainless Steel Coil 1250Mm Width Cold Rolled BA Mirror Finish Grade 410 430

Is 430 a good stainless steel?

Grades 430 and 304 are the two most common grades of stainless steel. Both offer a durable iron alloy that can resist rust and corrosion. Typically, however, grade 304 provides more corrosion resistance and thus greater longevity than grade 430, which is a more budget-friendly option.

Is 430 stainless steel good for utensils?

430 stainless steel is also heat-resistant, meaning it can withstand high temperatures without degrading. This makes it ideal for use in appliances and heating systems. 430 stainless steel is non-toxic and e to handle. This makes it a good choice for products intended for children or pets to consume or touch.

NORMAL SIZE

Thickness (mm)	Width(mm)
Thickness (mm)	600-999	1000	1200	1219	1250	1500
0.12-0.19	√	√	√	√	√
0.20-0.29	√	√	√	√	√
0.30-0.39	√	√	√	√	√
0.40-0.49	√	√	√	√	√
0.50-0.59	√	√	√	√	√
0.60-0.69	√	√	√		√	√
0.70-0.79	√	√	√		√	√
0.80-0.89	√	√	√		√	√
0.90-0.99	√	√	√		√	√
1.00-1.20	√	√	√		√	√

Product Name	Stainless Steel Coil / Strip / Sheets
Standard	AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc.
Material	201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321, 310S, 309S, 410, 410S,420, 430, 431, 440A, 904L, 2205, 2507, ect.
Thickness(mm)	Cold rolled:0.25mm-3.0mmHot rolled: 3.0mm-180mmAs Your Request
Width(mm)	Hot rolled regular width:1500,1800,2000, As Your RequestCold rolled regular width:1000,1219,1250,1500,As Your Request
Technique	Hot rolled / cold rolled
Length	1-12m or as Your Request
Surface	2B,BA(bright annealed) NO.1 NO.2 NO.3 NO.4,2D, 4K, 6K, 8K HL(Hair Line), SB, Embossed,as your request
Application	Furniture, doors, kitchen appliances, structural material, commercial use, structural use ,roofing,corrugated roofing, household appliance, industry, auto parts,cold roomse, etc.
Packing	Standard Sea-worthy Packing / As Your Request
International certification method:	ISO SGS BV CE

Stainless Steel Chemical Composition Chart, Percentage (%)
Stainless Steel	C, ≤	Mn, ≤	P, ≤	S, ≤	Si, ≤	Cr	Ni	Mo	N, ≤	Other Elements, ≤
304	0.08	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	–	–
304L	0.03	2.00	0.045	0.03	1.00	18.0-20.0	8.0-12.0	–	–	–
316	0.08	2.00	0.045	0.030	1.00	16.0-18.0	10.0-14.0	2.00-3.00	–	–
316L	0.03	2.00	0.045	0.030	1.00	16.0-18.0	10.0-14.0	2.00-3.00	–	–
321	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	0.10	≥ Ti 5×(C+N), ≤ 0.70
201	0.15	5.50-7.50	0.06	0.03	1.00	16.0-18.0	3.5-5.5	–	0.25	–
202	0.15	7.50-10.00	0.06	0.03	1.00	17.0-19.0	4.0-6.0	–	0.25	–
205	0.12-0.25	14.0-15.5	0.06	0.03	1.00	16.5-18.0	1.0-1.7	–	0.32-0.40	–
301	0.15	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.10	–
301L	0.03	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.20	–
301LN	0.03	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.07-0.20	–
302	0.15	2.00	0.045	0.03	0.75	17.0-19.0	8.0-10.0	–	0.10	–
302B	0.15	2.00	0.045	0.03	2.00-3.00	17.0-19.0	8.0-10.0	–	0.10	–
303	0.15	2.00	0.2	≥0.15	1.00	17.0-19.0	8.0-10.0	–	–	–
303Se	0.15	2.00	0.2	0.06	1.00	17.0-19.0	8.0-10.0	–	–	Se 0.15
304H	0.04-0.10	2.00	0.045	0.03	0.75	18.0-20.0	8.0-10.5	–	–	–
304N	0.08	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	0.10-0.16	–
304LN	0.03	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	0.10-0.16	–
305	0.12	2.00	0.045	0.03	1.00	17.0-19.0	11.0-13.0	–	–	–
308	0.08	2.00	0.045	0.03	1.00	19.0-21.0	10.0-12.0	–	–	–
309	0.2	2.00	0.045	0.03	1.00	22.0-24.0	12.0-15.0	–	–	–
309S	0.08	2.00	0.045	0.03	1.00	22.0-24.0	12.0-15.0	–	–	–
309H	0.04-0.10	2.00	0.045	0.03	0.75	22.0-24.0	12.0-15.0	–	–	–
309Cb	0.08	2.00	0.045	0.03	1.00	22.0-24.0	12.0-16.0	–	–	≥ Cb 10 x C, ≤1.10
309HCb	0.04-0.10	2.00	0.045	0.03	0.75	22.0-24.0	12.0-16.0	–	–	≥ Cb 10 x C, ≤1.10
310	0.25	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	–
310S	0.08	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	–
310H	0.04-0.10	2.00	0.045	0.03	0.75	24.0-26.0	19.0-22.0	–	–	–
310Cb	0.08	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	≥ Cb 10 x C, ≤ 1.10
310 MoLN	0.02	2.00	0.03	0.01	0.5	24.0-26.0	20.5-23.5	1.60-2.60	0.09-0.15	–
314	0.25	2.00	0.045	0.03	1.50-3.00	23.0-26.0	19.0-22.0	–	–	–
316H	0.04-0.10	2.00	0.045	0.03	0.75	16.0-18.0	10.0-14.0	2.00-3.00	–	–
316Ti	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.1	≥ Ti 5 × (C + N), ≤0.70
316Cb	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.1	≥ Cb 10 × C, ≤ 1.10
316N	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.10-0.16	–
316LN	0.03	2.00	0.045	0.03	1.00	16.0-18.0	10.0-13.0	2.00-3.00	0.10-0.16	–
317	0.08	2.00	0.045	0.03	1.00	18.0-20.0	11.0-15.0	3.0-4.0	0.1	–
317L	0.03	2.00	0.045	0.03	0.75	18.0-20.0	11.0-15.0	3.0-4.0	0.1	–
317LM	0.03	2.00	0.045	0.03	0.75	18.0-20.0	13.5-17.5	4.0-5.0	0.2	–
317LMN	0.03	2.00	0.045	0.03	0.75	17.0-20.0	13.5-17.5	4.0-5.0	0.10-0.20	–
317LN	0.03	2.00	0.045	0.03	0.75	18.0-20.0	11.0-15.0	3.0-4.0	0.10-0.22	–
321	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	0.1	≥ Ti 5 × (C + N), ≤ 0.70
321H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-12.0	–	–	≥ Ti 4 × (C + N), ≤ 0.70
334	0.08	1.00	0.03	0.015	1.00	18.0-20.0	19.0-21.0	–	–	Al 0.15-0.60, Ti 0.15-0.60
347	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	–	≥ Cb 10 × C, ≤ 1.00
347H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-13.0	–	–	≥ Cb 8 × C, ≤ 1.00
347LN	0.005-0.020	2.00	0.045	0.03	1.00	17.0-19.0	9.0-13.0	–	0.06-0.10	Cb 0.20-0.50, 15 × C ≥
348	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	–	Cb 10×C-1.10, Ta 0.10, Co 0.20
348H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-13.0	–	–	(Cb + Ta) 8×C ≥ , 1.00 ≤, Ta 0.10, Co 0.20
2205	0.03	2.00	0.03	0.02	1.00	22.0-23.0	4.5-6.5	3.0-3.5	0.14-0.20	–
2304	0.03	2.5	0.04	0.03	1.00	21.5-24.5	3.0-5.5	0.05-0.60	0.05-0.60	–
255	0.04	1.5	0.04	0.03	1.00	24.0-27.0	4.5-6.5	2.9-3.9	0.10-0.25	Cu 1.50-2.50
2507	0.03	1.2	0.035	0.02	0.8	24.0-26.0	6.0-8.0	3.0-5.0	0.24-0.32	Cu ≤0.50
329	0.08	1.00	0.04	0.03	0.75	23.0-28.0	2.0-5.00	1.00-2.00	–	–
403	0.15	1.00	0.04	0.03	0.5	11.5-13.0	–	–	–	–
405	0.08	1.00	0.04	0.03	1.00	11.5-14.5	≤0.5	–	–	Al 0.10-0.30
410	0.08-0.15	1.00	0.04	0.03	1.00	11.5-13.5	–	–	–	–
410S	0.08	1.00	0.04	0.03	1.00	11.5-13.5	≤0.6	–	–	–
414	0.15	1.00	0.04	0.03	1.00	11.5-13.5	1.25-2.50	–	–	–
416	0.15	1.25	0.06	≥0.15	1.00	12.0-14.0	–	–	–	–
416Se	0.15	1.25	0.06	≥0.06	1.00	12.0-14.0	–	–	–	Se 0.15
420	0.15, ≥	1.00	0.04	0.03	1.00	12.0-14.0	–	–	–	–
420F	0.30-0.40	1.25	0.06	≥0.15	1.00	12.0-14.0	≤0.5	–	–	Cu 0.60
420FSe	0.20-0.40	1.25	0.06	0.15	1.00	12.0-14.0	≤0.5	–	–	Se 0.15; Cu 0.60
422	0.20-0.25	0.50-1.00	0.025	0.025	0.5	11.0-12.5	0.50-1.00	0.90-1.25	–	V (0.20-0.30), W (0.90-1.25)
429	0.12	1.00	0.04	0.03	1.00	14.0-16.0	–	–	–	–
430	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	–	–	–
430F	0.12	1.25	0.06	≥0.15	1.00	16.0-18.0	–	–	–	–
430FSe	0.12	1.25	0.06	0.06	1.00	16.0-18.0	–	–	–	Se 0.15
439	0.03	1.00	0.04	0.03	1.00	17.0-19.0	≤0.5	–	0.03	≥ Ti [0.20+4(C+N)], ≤ 1.10; Al 0.15
431	0.2	1.00	0.04	0.03	1.00	15.0-17.0	1.25-2.50	–	–	–
434	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	0.75-1.25	–
436	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	0.75-1.25	–	≥ Cb 5×C, ≤ 0.80
440A	0.60-0.75	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440B	0.75-0.95	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440C	0.95-1.20	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440F	0.95-1.20	1.25	0.06	0.15	1.00	16.0-18.0	≤0.5	–	–	Cu ≤0.60
440FSe	0.95-1.20	1.25	0.06	0.06	1.00	16.0-18.0	≤0.5	–	–	Se ≤0.15; Cu ≤0.60
442	0.2	1.00	0.04	0.04	1.00	18.0-23.0	≤0.6	–	–
444	0.025	1.00	0.04	0.03	1.00	17.5-19.5	≤1.00	1.75-2.50	0.035	Ti+Cb 0.20+4 × (C+N)-0.80
446	0.2	1.5	0.04	0.03	1.00	23.0-27.0	≤0.75	–	0.25	–
800	0.1	1.5	0.045	0.015	1.00	19.0-23.0	30.0-35.0	–	–	Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60
800H	0.05-0.10	1.5	0.045	0.015	1.00	19.0-23.0	30.0-35.0	–	–	Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60
904L	0.02	2.00	0.045	0.035	1.00	19.0-23.0	23.0-28.0	4.00-5.00	0.1	Cu 1.00-2.00
Alloy 20	0.07	2.00	0.045	0.035	1.00	19.0-21.0	32.0-38.0	2.00-3.00	–	Cu 3.0-4.0; ≥ Nb 8 × C; ≤1.00
XM-1	0.08	5.0-6.5	0.04	0.18-0.35	1.00	16.00-18.0	5.0-6.5	–	–	Cu 1.75-2.25
XM-2	0.15	2.00	0.05	0.11-0.16	1.00	17.0-19.0	8.0-10.0	0.40-0.60	–	Al 0.60-1.00
XM-5	0.15	2.5-4.5	0.2	≥0.25	1.00	17.0-19.0	7.0-10.0	–	–	–
XM-6	0.15	1.50-2.50	0.06	≥0.15	1.00	12.0-14.0	–	–	–	–
XM-10	0.08	8.0-10.0	0.045	0.03	1.00	19.0-21.5	5.5-7.5	–	0.15-0.40	–
XM-11	0.04	8.0-10.0	0.045	0.03	1.00	19.0-21.5	5.5-7.5	–	0.15-0.40	–
XM-15	0.08	2.00	0.03	0.03	1.50-2.50	17.0-19.0	17.5-18.5	–	–	–
XM-17	0.08	7.50-9.00	0.045	0.03	0.75	17.5-22.0	5.0-7.0	2.00-3.00	0.25-0.50	–
XM-18	0.03	7.50-9.00	0.045	0.03	0.75	17.5-22.0	5.0-7.0	2.00-3.00	0.25-0.50	–
XM-19	0.06	4.0-6.0	0.045	0.03	1.00	20.5-23.5	11.5-13.5	1.50-3.00	0.20-0.40	Cb 0.10-0.30, V 0.10-0.30
XM-21	0.08	2.00	0.045	0.03	0.75	18.0-20.0	8.0-10.5	–	0.16-0.30	–
XM-27	0.01	0.4	0.02	0.02	0.4	25.0-27.5	≤0.5	0.75-1.50	0.015	Cu 0.20; Cb 0.05-0.20; (Ni + Cu) 0.50
XM-33	0.06	0.75	0.04	0.02	0.75	25.0-27.0	≤0.5	0.75-1.50	0.04	Cu 0.20; Ti 0.20-1.00; ≥ Ti 7(C+N)
XM-34	0.08	2.5	0.04	≥0.15	1.00	17.5-19.5	–	1.50-2.50	–	–
PH 13-8Mo	0.05	0.2	0.01	0.008	0.1	12.25-13.25	7.5-8.5	–	–	–
15-5 PH	0.07	1	0.04	0.03	1	14.0-15.5	3.5-5.5	–	–	2.5-4.5 Cu; 0.15-0.45 Nb
17-4 PH	0.07	1	0.04	0.03	1	15.5-17.5	3.0-5.0	–	–	3.0-5.0 Cu; 0.15-0.45 Nb
17-7 PH	0.09	1	0.04	0.04	1	16.0-18.0	6.5-7.75	–	–	0.75-1.5 Al

Packing and transportation:

About Us:

We provide customers with different specifications and materials for stainless with 10 years' experience.Special Purpose with high quality, fast delivery, competitive price and excellent exprience of after-sale service.We have keep highly appreciated cooperation with purchasers from many countries .If you are interested in our products, please feel free to contact me any time! Welcome to hear from your inquiry!

Certificates:

CUSTOMER:

FEEDBACK:

FAQ:

How about the delivery time?

Within 15-30days after receiving the deposit or L/C at sight. Of course, the detail will be confirmed by the quantity and the different products.

How to order?

Please send us your purchase order by email. Or you can ask us to send you a proforma invoice for your order. We need to know the following information for your order.

What is shipment terms?

1. Container ship 2. bulk ship 3. Train

Do you have English Mill Test Certificates?

Yes,that is what we give gurantee to our clients

Do you accept the third party inspection?

Yes,absolutely we accept.

Product Tags:


*From:	Your email address is incorrect!
*To:	JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Stainless Steel Sheet Coil
Brand Name:	TISCO
Model Number:	ASTM 316LVM
Certification:	SGS ISO ROHS
Place of Origin:	JIANGSU
MOQ:	1MT
Price:	Negotiable
Payment Terms:	L/C, T/T, Western Union
Supply Ability:	2000MT/Month
Delivery Time:	3~15 days
Packaging Details:	Exporting package/wooden box package/Or per customers’ requirement
Name:	99.9% Pure Nickel Stainless Steel Coil 1250Mm Width Cold Rolled BA Mirror Finish Grade 410 430
Coil weight:	3-10MT
Edge:	Slit Edge,Mill Edge
Thickness:	0.3-120mm
Material:	400 Series
Price term:	CIF CFR FOB EX-WORK