Product Details
Company Profile

Plastic Cutting End Mills AlTiN Or TiSiN Coating 100% Self Inspection Rate

Plastic Cutting End Mills AlTiN Or TiSiN Coating 100% Self Inspection Rate

KTC Thread Mill Cutter

Tapping may be the most common method for putting threads into a hole, but it is not always the best method. Difficult to cut materials, small hole sizes, or threading close to the bottom of a blind hole can push the limits of tap capabilities. An alternative way to create threads and overcome these hurdles is through the use of a thread milling cutter. all-carbide thread milling cutters can be made to order to suit specific customer applications by adjusting the cutter diameter, neck length, and number of threads.

Specifications

The tungsten steel thread milling cutter is made of high-quality ultrafine tungsten steel material at home and abroad, with bending strength of 4300mpa, particle size of 0.4μm and coating of AlTiN or TiSiN. The coating adopts AlTiN or TiSiN imported from Switzerland. High precision quality control, self inspection rate is 100%, qualified rate is 100%. With this kind of tool, the cutting in thread milling of M1.0 and above can be completed in an instant. Innovative thread milling cutter: core hole drilling and thread milling can be completed in one working step with only one cutter. Especially, thread milling cutter is suitable for copper, aluminum, medium and high carbon steel, die steel, pre-hardened steel and other material hole processing.

Raw Material	GU25UF
WC	88%
Co	12%
TRS	>4300N/mm2
Hardness	>92HRA
A.O.L	50mm-90mm
Grain size	0.4 μm
Upto	HRC60
Flutes No	3/4F
Coating	AlTiN or TiSiN
Suitable for	copper, aluminum, medium and high carbon steel, die steel, pre-hardened steel and other material hole processing

Coating:

Item	AlTiN	TiSiN
Hardness(HV)	3200	3600
Thickness(UM)	2.5-3	3
Oxidation temp(°)	900	1000
Friction coeffient	0.3	0.45
Color	Black	Copper

Standard Sizes

UN 60° Inner Thread Mill Cutter for Aluminum
Pitch (TPI)	UNC	UNF	UNEF	Shank Dia.	Edge Dia.	No. of Flutes	Flute Length	Overall Length	Bottom Hole Dia.
36		No.8-36		4	3	3	8.5	50	3.5
32		No.10-32	No.12-3/8-32	4	3.5	3	11.1	50	4
28		No.12-28,1/4-28	7/16,1/2-28	4	4	3	11.8	50	4.6
28		1/4-28	7/16,1/2-28	6	5	3	12.7	57	5.5
28			7/16,1/2-28	10	9.2	4	22.7	75	10.2
24	No.10-24	5/16,3/8-24	9/16,11/16-24	4	3.2	3	10.6	50	3.8
24	No.12-24	5/16,3/8-24	9/16,11/16-24	4	4	3	11.6	50	4.5
24		5/16,3/8-24	9/16,11/16-24	6	6	3	15.9	57	6.8
24		3/8-24	9/16,11/16-24	8	7.8	3	19.1	60	8.5
24			9/16,11/16-24	12	11.9	4	28.6	75	13.2
20	1/4-20	7/16,1/2-20	3/4,1-20	4	4	3	12.7	50	5.2
20		7/16,1/2-20	3/4,1-20	10	9	4	22.9	75	9.8
20		1/2-20	3/4,1-20	10	10	4	25.4	75	11.5
20			3/4,1-20	12	12	4	38.1	75	17.8
18	5/16-18	9/16	11/16,1-11/16-18	6	5.8	3	16.9	57	6.5
18		9/16,5/8-18	11/16,1-11/16-18	10	10	4	29.6	75	12.8
16	3/8-16	3/4-16		8	7.6	3	19.1	60	8
16		3/4-16		12	12	4	28	75	17.5
14	7/16-14	7/8-14		8	8	3	20	60	9.3
14		7/8-14		16	16	4	39.9	90	20.5
13	1/2-13			8	8	3	20	60	10.8
12	9/16-12	1"1-1/2-12		10	10	4	28	75	12.3
12		1"1-1/2-12		16	16	4	40	90	23.5
11	5/8-11			12	12	4	30	75	13.5
10	3/4-10			12	12	4	30	75	16.5
9	7/8-9			16	16	4	38	90	19.5
8	1-8			16	16	4	40	90	22

UN 60° Outer Thread Mill Cutter for Aluminum
Pitch (TPI)	UNC	UNF	Shank Dia.	Edge Dia.	No. of Flutes	Flute Length	Overall Length
32	No.8-32		6	6	3	11.91	50
28		No.12-28	6	6	3	12.7	50
24	No.12-24		6	6	3	12.7	50
20	1/4-20		6	6	3	15.4	50
18	5/16-18		8	8	3	16.93	60
16	3/8-16		8	8	3	19.05	60
12	9/16-12		12	12	4	29.6	75

M ISO Standard 60°Inner Thread Mill Cutter for Steel
Pitch (mm)	M Coarse Thread	M Fine Thread	Shank Dia.	Edge Dia.	No. of Flutes	Flute Length	Overall Length	Bottom Hole Dia.
0.5	M3*0.5		4	2.3	3	6	50	2.5
0.5		M6*0.5	4	4	3	10	50	5.5
0.5		M8-M12*0.5	6	6	3	13	50	7.5
0.6	M3.5*0.6		4	2.7	3	7	50	2.9
0.7	M4*0.7		4	3	3	8	50	3.3
0.75	M4.5*0.75		4	3.4	3	9	50	3.75
0.75		M10-M12*0.75	8	8	3	20	50	9.25
0.8	M5*0.8		4	4	3	10	50	4.2
1	M6*1.0		6	4.8	3	12	57	5.0
1		M8*1.0	6	6	3	16	57	7.0
1		M10*1.0	8	8	3	20	60	9.0
1		M12*1.0	10	10	4	22	75	11.0
1		M16*1.0	12	12	4	22	75	15.0
1		M20-M48*1.0	16	16	4	30	90	19.0
1.25	M8*1.25		6	6	3	16	57	6.75
1.25		M12-M14*1.25	10	10	4	25	75	10.75
1.5	M10*1.5		8	8	3	20	60	8.5
1.5		M12-M20*1.5	10	10	4	28	75	10.5
1.5		M14-M24*1.5	12	12	4	28	75	12.5
1.5		M20-M48*1.5	16	16	4	30	90	18.5
1.75	M12*1.75		10	9.8	4	30	75	10.25
2	M14*2.0	M15-M16*2.0	10	10	4	30	75	12.0
2	M16*2.0	M17-M20*2.0	12	12	4	30	75	14.0
2		M20-M80*2.0	16	16	4	40	90	18.0
2.5	M18-M20*2.5		14	14	4	36	85	15.5
2.5	M20-M80*2.5		16	16	4	40	90	17.5
3	M24*3.0		16	16	4	42	90	21.0
0.75		M6*0.75	6	4.8	3	12	60	5.25
0.75		M8*0.75	6	6	3	16	60	7.25
1.25		M10*1.25	8	8	3	20	60	8.75

M ISO Standard 60°Outer Thread Mill Cutter for Steel
Pitch (mm)	M Coarse Thread	Shank Dia.	Edge Dia.	No. of Flutes	Flute Length	Overall Length
0.5	M3*0.5	4	4	3	6	50
0.7	M4*0.7	4	4	3	8	50
0.75	M4.5*0.75	4	4	3	9	50
0.8	M5*0.8	4	4	3	10	50
1	M6*1.0	6	6	3	13	57
1.25	M8*1.25	6	6	3	16	57
1.5	M10*1.5	8	8	3	20	60
1.75	M12*1.75	10	10	4	28	75
2	M14*2.0	10	10	4	30	75
2.5	M18*2.5	14	14	4	36	85
3	M24*3.0	16	16	4	40	90

Product Tags:


*From:	Your email address is incorrect!
*To:	Changzhou Xinpeng Tools Manufacturing Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Thread Mill Cutter
Model Number:	Coated Thread Mill Cutter
Place of Origin:	MADE IN CHINA
Brand Name:	KTC
Certification:	CCC
MOQ:	10 pcs
Price:	Negotiation
Packaging Details:	1PC/ PVC Packing, 10pcs PVC Packing/Pack...
Delivery Time:	1-35days
Payment Terms:	T/T, L/C,Paypal...
Supply Ability:	10000pcs/week
Product Name:	End Mills
Raw Material:	GU25UF
Coating:	AlTiN or TiSiN
Color:	Black or Copper
Hardness:	>92HRA
Cutting Diameter:	Based on the Flute Length