Product Details
Company Profile

OEM/ODM VFD High Performance Frequency Inverter With Buffer Reply Contactor

Special VFD high performance frequency inverter with buffer reply contactor

High performance

Drive three phase AC asynchronous motor and permanent synchronous motor, and supports three control modes of speed, torque and servo position.
Excellent asynchronous and synchronous motor SVC algorithm can control the speed and torque of the motor with high precision even without encoder feedback, and the low-frequency torque control accuracy is better than that of imported brands.

High reliability

15KW and above models are euipped with built-in DC reactor as standard.
37KW an below are equipped with built-in braking unit as standard, and models below 90KW are euipped with brake circuit short circuit protection function.
The whole series is equipped with buffer relay(contactor) abnormality protection circuit as standard.

User friendly

All weak current circuit terminals adopt plug-in terminals with humanized identification, which is convenient for wiring and maintenance.
Standard one-line incremental encoder interface(with Z input) No need to purchanse PG card separately in common speed closed-loop occasions.
Standard motor temperature sensor interface, support PT100 PT1000, KTY84, without optional temperature detection card.

Product specification

Item		Specification
Input	Input voltage	1phase/3phase 220V:200V-240V 3phase 400V:380V-480V
	Allowed Voltage fluctuation range	-15%～10%
	Input frequency	50Hz / 60Hz,fluctuation less than 5%
	Input filter	SIZE C and above with built in DC reactor
Output	Output voltage	3phase:0～input voltage
Output	Overload capacity	150% rated output current for 60s；180% rated output current for 10s；200% rated output current for 2.0s
Control	Control mode	V/f control Sensorless vector control (SVC) Vector control with speed sensor (VC)
	Operating mode	Speed control,torque control(SVC ;VC),position servo
	Speed range	1:100(V/f) 1:200(SVC) 1:1000(VC)
	Speed control accuracy	±0.5%(V/f) ±0.2%(SVC) ±0.01%(VC)
	Frequency range	0.00～600.00Hz(standard) 0.0～2000.0Hz(higher standard)
	Input frequency resolution	Digital input:0.01Hz or 0.01% Analog input:The maximum frequency is 0.025%
	Startup torque	150%/0.5Hz(V/f) 180%/0.25Hz(SVC) 180%/0Hz(VC)
	Torque control accuracy	SVC:5Hz within 8%,5Hz above 5% VC:3.0%
	Frequency giving ramp	Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s ~ 60000s
	Position control	The position command supports internal position, pulse position input, CAN open position command, Ether CAT position command (VFD586). Support position full closed loop mode
	DC bus voltage control	Overvoltage stall control: limit the power generation of the motor by adjusting the output frequency to avoid skipping the voltage fault; Undervoltage stall control: control the power consumption of the motor by adjusting the output frequency to avoid skipping the voltage fault；
	Carrier frequency	1kHz～16kHz(Varies depending on the type)
	Startup method	Direct start (can be superimposed DC brake); speed tracking start
	Stop method	Deceleration stop (can be superimposed DC braking); free to stop
	Special functions	Built-in delay unit, comparison unit and logic unit, etc., two groups of motor parameter switching, software switching output phase sequence, spindle orientation, online identification of motor parameters

Item		Specification
Function	Keypad	The following three control panels can be configured: LED display(MTBOP1)； Shuttle display(MTBOP2)； LCD display(MTSOP1)
	Communication	SLOT2 expansion: MODBUS-RTU Communication； CAN open Communication； ProfiNet Communication； EtherCAT Communication(VFD586)
	Encoder interface	Standard: Incremental encoder interface, differential or open collector signal input; differential maximum input 500KHz, open collector maximum input 100KHz; SLOT1 extension: Incremental encoder; Resolver; Sine-cosine encoder; Tamagawa Protocol Absolute Encoder
	Input terminal	Standard: 7 digital input terminals and one of which supports high-speed pulse input up to 50kHz; 3 analog input terminals,1 support 0 ~ 10V voltage input and 2 support 0 ~ 10V voltage input or 0 ~ 20mA current input 1 motor temperature detection, support PT100, PT1000, KTY84-130 three kinds of thermistor input; SLOT2 extension: 1DI digital terminal input(VFD580-IOEX1)
	Output terminal	Standard: 2 digital output terminals；1 high-speed pulse output terminal (open collector type), support 0 ~ 50kHz square wave signal output； 2 relay output terminals； 2 analog output terminals,1 support 0～10V voltage output,1 support 0～20mA current output or 0～10V voltage output； SLOT2 extension: 2 digital output terminals(VFD580-IOEX1)
Protection	Refer to Chapter 6 "Troubleshooting and Countermeasures" for the protection function
Environment	Installation location	Indoor, no direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.
	Altitude	0-3000m.inverter will be derated if altitude higher than1000m and rated output current will reduce by 1% if altitude increase by 100m
	Ambient temperature	-10°C~ +40°C, maximum 50°C (derated if the ambient temperature is between 40°C and 50°C) Rated output current decrease by 1.5% if temperature increase by 1°C
	Humidity	Less than 95%RH, without condensing
	Vibration	Less than 5.9 m/s² (0.5 g)
	Storage temperature	-20°C ~ +60°C
Other	Installation	Wall-mounted, floor-controlled cabinet, transmural
	Installation	Through-the-wall (requires optional accessories, see "7.2 Optional accessories for through-wall installation")
	Protection level	IP21
	Cooling method	Forced air cooling
	Grid system	TT/TN/IT (VDR and EMC screws must be removed for disconnection to earth for IT grid systems)

Product picture

FAQ

1. What voltage range can you support?

Single-phase 220v input, single-phase 220v output;
Single-phase 220v input, three-phase 220v output;
Three-phase 220v input, three-phase 220v output;
Single-phase 220v input, three-phase 380v output;

2. What is the standard of package?

Below 37kw, it's carton package; 45kw and above, it's wooden package.

3. Do you accept OEM business?

We accept OEM and ODM with your autherization.

Product Tags:

VFD High Performance Frequency Inverter

ODM VFD Frequency Inverter

OEM VFD Frequency Inverter

OEM/ODM VFD High Performance Frequency Inverter With Buffer Reply Contactor

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Veikong Electric Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	VFD Variable Frequency Drive
Brand Name:	VEIKONG
Model Number:	VFD580
Certification:	CE
Place of Origin:	Shenzhen
MOQ:	1
Price:	Negotiable
Payment Terms:	Western Union, T/T, L/C, D/A, D/P, PayPal
Supply Ability:	15000pcs per Month
Delivery Time:	3 days, depend on the order quantity
Packaging Details:	Carton and wooden box
Product Name:	high performance frequency inverter
Display:	LCD/LED
Output type:	Three phase
Voltage:	380V-480V
OEM/ODM:	Acceptable
Warranty:	18 months