| Sign In | Join Free | My benadorassociates.com |
|
| Sign In | Join Free | My benadorassociates.com |
|
| Categories | Seamless Boiler Tubes |
|---|---|
| Brand Name: | Joyruns |
| Model Number: | EN10216-1 |
| Certification: | TS16949，ISO9001 |
| Place of Origin: | China |
| MOQ: | 5T |
| Payment Terms: | TT, LC |
| Delivery Time: | 30days |
| Packaging Details: | Plastic packing,woodenbox |
| Standard: | EN10216-1 |
| Material: | P265，P265GH |
| OD Size: | 16mm To 140mm |
| Wall Thickness: | 1.5mm--40mm |
| Length: | Single Random, Double Random & Cut Length |
| Heat Treatment: | Bright Annealing, Normalizing, Annealing, Stress Relieving, Quenching & Tempering, Etc |
| Surface Finish: | Annealed & Pickled, Oiling |
| Testing: | NDT, Ultrasonic Test, Hydrostatic Test, Eddy Current Test, Etc |
| Payment Term: | TT/LC |
| Company Info. |
| Changzhou Joyruns Steel Tube CO.,LTD |
| Verified Supplier |
| View Contact Details |
| Product List |
High-pressure boiler seamless steel tubes are often under high temperatures and pressure when used. The tubes will be oxidized and corroded under the action of high-temperature flue gas and water vapor. It is required that the steel pipe has high durability, high resistance to oxidation and corrosion, and good structural stability. High-pressure boiler seamless tubes are mainly used to manufacture superheater tubes, reheater tubes, air ducts, and main steam tubes for high-pressure and ultra-high-pressure boilers.
Application:
①General boiler seamless pipes are mainly used to make water wall
pipes, boiling water pipes, superheated steam pipes, superheated
steam pipes for locomotive boilers, large and small smoke pipes and
arched brick pipes.
②High-pressure boiler tubes are mainly used to manufacture
superheater tubes, reheater tubes, air guide tubes, main steam
tubes, etc. of high-pressure and ultra-high-pressure boilers.
EN 10216-1 P265 Seamless steel tubes will be manufactured by a seamless process. The forming operations and delivery conditions are shown in Table 1.
Table 1 — Forming operations and delivery conditions
| Forming operation | Quality | Delivery condition |
| Hot formed | TR1 | As formed or normalized or normalizing-formed |
| TR2 | Normalized or normalizing-formed | |
| Hot formed + cold finished | TR1 and TR2 | Normalized |
Chemical composition of EN 10216-1 P265
1. Chemical composition (cast analysis) a in % by mass for quality
TR2
| Steel grade | Steel number | C max. | Si max. | Mn max. | P max. | S max. | Cr max. | Mo max | Ni max. |
| P265TR2 | 1.0259 | 0,20 | 0,40 | 1,40 | 0,025 | 0,015 | 0,30 | 0,08 | 0,30 |
| Al tot min. | Cu max | Nb max. | Ti max. | V max. | Cr+Cu+Mo+Ni max. |
| 0,02 | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
2. Chemical composition (cast analysis) a in % by mass for quality TR1
| Steel grade | Steel number | C max. | Si max. | Mn max. | P max. | S max. | Cr max. | Mo max | Ni max. | Al tot min. |
| P265TR1 | 1.0258 | 0,20 | 0,40 | 1,40 | 0,025 | 0,020 | 0,30 | 0,08 | 0,30 | - |
| Al tot min. | Cu max | Nb max. | Ti max. | V max. | Cr+Cu+Mo+Ni max. |
| - | 0,30 | 0,010 | 0,04 | 0,02 | 0,70 |
Mechanical properties of EN 10216-1 P265
1. Mechanical properties for quality TR2
| Steel grade | Tensile properties | Impact properties | ||||||||
| Steel name | Steel number | Upper yield strength R eH b min. for Wall Thickness T mm | Tensile Strength R m | Elongation A min. % | Minimum average absorbed energy KV 2 J at a temperature of °C | |||||
| T ≤ 16 | 16 < T ≤ 40 | 40 < T ≤ 60 | l | t | ||||||
| MPa * | MPa * | MPa * | MPa * | l | t | 0 | -10 | 0 | ||
| P265TR2 | 1.0259 | 265 | 255 | 245 | 410 to 570 | 21 | 19 | 40 | 28 d | 27 |
Note: l = longitudinal t = transverse
2. Mechanical properties for quality TR1
| Steel grade | Tensile properties | Impact properties | ||||||||
| Steel name | Steel number | Upper yield strength R eH b min. for Wall Thickness T mm | Tensile Strength R m | Elongation A min. % b c | Minimum average absorbed energy KV 2 J at a temperature of °C c | |||||
| T ≤ 16 | 16 < T ≤ 40 | 40 < T ≤ 60 | l | t | ||||||
| MPa * | MPa * | MPa * | MPa * | l | t | 0 | -10 | 0 | ||
| P265TR1 | 1.0258 | 265 | 255 | 245 | 410 to 570 | 21 | 19 | - | - | - |
Note: l = longitudinal t = transverse
Tolerances of EN 10216-1 Seamless steel tubes
Tolerances on outside diameter and on wall thickness
| Outside diameter D mm | Tolerances on D | Tolerances on T for a T/D ratio | |||
| ≤ 0,025 | > 0,025 ≤ 0,050 | > 0,050 ≤ 0,10 | > 0,10 | ||
| D ≤ 219,1 | ± 1% or ± 0,5 mm whichever is the greater | ± 12,5 % or ± 0,4 mm whichever is the greater | |||
| D > 219,1 | ± 20 % | ± 15 % | ± 12,5 % | ± 10 % a | |
| a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5 % of the wall thickness T | |||||
Tolerances on exact lengths
| Length L | Tolerance on exact length |
| L ≤ 6 000 | + 10 0 |
| 6 000 < L ≤ 12 000 | +15 0 |
| L > 12 000 | +by agreement 0 |
|
JIS3454 STPG370 Seamless Boiler Tubes Cold Drawn Boiler Carbon Steel Tubes 88.9*7.11mm
ASTM A179 seamless boiler tubes 1/2“ to 16" size ISO9000 length 20M
60.3*6.35mm ASTM A192 Tube , A192M Black Carbon Steel Pipe Seamless Cold Drawing
ASTM A179 seamless boiler steel tube for heat exchangers, condensers, heat transfer equipment and similar pipes
Steam Heavy Wall Steel Pipe ASTM A210 high temperature , Seamless boiler tube
ASTM A333 GR6 50.3*3.8mm Seamless Carbon Steel Tube
25.4*2.11 Seamless Boiler Tubes ASTM A192 Pipe Cold Drawing For High Pressure Settings
DIN17175 Seamless Boiler Tubes Heat Resistant Astm A179 Tubing ST35 ST45 ST52
Boiler Nickel Alloy Tube BS 3059 Gr 320 Carbon Steel 60.3*5.4mm
JIS3454 STPG370 Seamless Boiler Tubes Cold Drawn Boiler Carbon Steel Tubes 88.9*7.11mm
