4 - 20MA Or RS485 Residual Chlorine Sensor CC1 With Flow Cell For Swimming Pool

4-20MA Or RS485 Residual Chlorine Sensor CC1 With Flow Cell For Swimming Pool

The Modbus film-attached chlorine sensor CC1 has many advantages in automation and remote monitoring applications:

Remote monitoring and control: The Modbus communication protocol allows the residual chlorine sensor to communicate with equipment such as monitoring systems, PLCs (programmable logic controllers) or SCADA (supervisory and data acquisition systems). This means that users can monitor the residual chlorine concentration in real time and control it remotely from a remote location without having to be on site.

Data integration: Using Modbus, the residual chlorine sensor can directly integrate the measurement data into the control system, making data processing easier. This can be integrated with data from other sensors and devices to provide comprehensive monitoring and control.

Real-time data update: Modbus communication allows the chlorine sensor to update data in real-time. This is important for applications that need to quickly understand changes in water quality so that immediate action can be taken to keep the water safe.

Highly configurable: Modbus communication allows users to configure according to their needs, including data transmission rate, communication protocol and other parameters. This means that the sensor can be adapted to different monitoring environments and needs.

Remote Diagnosis and Maintenance: Through Modbus communication, users can remotely diagnose sensor performance, monitor sensor status, detect faults and perform maintenance, thereby reducing downtime and maintenance costs.

Data recording and historical analysis: Using Modbus communication, the residual chlorine sensor can transmit historical data to the monitoring system, allowing users to perform data analysis and trend analysis, so as to better understand water quality changes.

Alarms and notifications: Through Modbus communication, the sensors can send alarms and notifications to the monitoring system, so that timely measures can be taken when problems or abnormal conditions occur.

In conclusion, the combination of Modbus communication protocol and membrane-attached residual chlorine sensor can improve the efficiency and accuracy of water quality monitoring, especially in applications that require remote monitoring, control, and data integration. This integration enables users to better manage water quality, reduce risk, and improve the efficiency of production or treatment processes.

Specifications

Chlorine sensor with membrane-covered, amperometric 3-electrode system. For the measurement of free chlorine on the basis of isocyanuric acid, also in seawater.

Areas of application: Fresh water and seawater; Surfactants are tolerated in part; a special electrolyte is used for seawater.

Scope of supply: CC1: sensor, membrane cap, electrolyte for use in fresh water use

Product description:

1. Measurand(s): NaClO (sodium hypochlorite), Ca(ClO)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine, and organic combined chlorine based on iso-cyanuric acid (tested up to an iso-cyanuric acid concentration of 500 mg/l)
2. Calibration: At the controller, via analytical chlorine determination by DPD 1 method. Observe the iso-cyanuric acid concentration when determining the free chlorine
3. Interferences: ClO2 is 100 % detected, O3 is detected
4. pH range: 4~12, greatly reduced pH dependence
5. Pressure range: 0~0.5 bar, no pressure surges and/or fluctuations
6. Temperature range: 0~45 ℃, (no ice crystals in test water allowed)
7. Integrated automatic temperature compensation
8. Response time: T90 about 2 min. 9. Flow rate: about 30 l/h, low flow dependence
10. Shaft length: Standard 175 mm, and up to 220 mm in length (mA-Version)
11.Connection: For mA-version 2-pole terminal, M12 male or Modbus RTU with M12 male
12.Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane

Suzhou Delfino Environmental Technology Co., Ltd. is a professional manufacturer of water analysis instruments and sensors, integrating development and production together. Our main products include online, portable water quality analysis instruments. Since its establishment, we have focused on the development and production of water quality analysis instruments.

The monitoring parameters of water quality analyzer instruments mainly include: pH, ORP, dissolved oxygen, conductivity/TDS/salinity, turbidity, SS, Chlorophyll, Blue-green algae, COD, NH4-N, NO3, free chlorine, peracetic acid and so on.

As the rapid growth of the global economy leads to increased consumption and urbanization, solid waste generation has increased significantly, directly affecting the water and wastewater treatment industry. Daruifuno aims to provide solutions to various industries and fields and create a cleaner and healthier drinking water environment for the earth.

Our products mianly application for follows industry：Municipal sewage water treatment plant, industrial wastewater treatment plant, Chemical, Petroleum, Papermaking, Food and drinking, Medicine, Electroplating, PCB plant, fish farm,Lake/river/ocean/groundwater/surface and so on.

Our company was established in 2015, but our predecessor has been committed to the water quality testing industry for more than 10 years. At present, we have our own R&D center with many senior engineers with more than 10 years of experience in the research and development of water quality analyzers and water quality sensors, and are equipped with strict front-line production workers, professional quality inspection personnel and testing equipment to check every process.

As a high-tech enterprise in China, our production is strictly in accordance with ISO9001 from raw material sources to finished equipment. After years of efforts, the company has obtained more than 20 patent certificates, high-tech enterprise certificates, CE, SGS, etc. He has accumulated rich practical experience in the field of water quality testing and has unique insights in the field of water quality testing.

Our company takes "reasonable prices, efficient production time, and good after-sales service" as its purpose and adheres to the business philosophy of "based on quality and creating value for customers". At present, the company is actively exploring the international market and actively promoting its own brands and products. It has been exported to Asia, Southeast Asia, Europe, Africa, and South America, with customers in more than 50 countries and regions around the world. And hope to develop together with customers for mutual benefit with high-quality products and sincere services.