1.6582 Round Forged Steel Rod Bar Dia 300 Mm X 1500 MmL 34CRNIMO6 12m

Round bar 1.6582 (Pre-Harden) Dia 300 mm x 1500 mmL 34CRNIMO6 Forged Steel Rod

Description

34CrNiMo6 grade steel is a general purpose steel used for a wide range of engineering parts.

It is capable of being heat treated to produce a wide range of tensile strengths combined with good ductility and resistance to shock.

34CrNiMo6 has good hardenability, enabling it to be used for medium tensile strengths in fairly large sections, and possesses good resistance to wear. At low temperatures good impact values can also be obtained.

Bars are often supplied in the hardened and tempered condition with a tensile strength exceeding 1000 N/mm2 (depending on section size). Material is readily machinable so that the components can be put into service without the cost of further treatment.

Bars can also be supplied in the softened state which require hardening and tempering but give increased machinability.

Nickel-chromium-molybdenum steels benefit from a combination of alloying elements. Nickel imparts toughness; chromium depth of hardness; molybdenum inhibits temper brittleness and each element tends to reduce grain size.

Size Range

32mm - 860mm Dia

Typical applications of 34CrNiMo6 grade steel

• Shafts
• Connection rod bolts
• Push rods
• Studs
• Pinion sleeves
• Mandrel bars for tube manufacturing
• Breech mechanism parts
• High-duty engine connecting rods
• High temperature bolts in oil refining and steam installations
• Machine tool parts including:
  • Spindle gears
  • Power transmission gears
  • Slide cams

Related Specifications DIN 17200 EN 10083 ASTM A29/A29M

34CrNiMo6 Chemical composition and Equivalents steel grade properties

Alloy Engineering Steel 34CrNiMo6 Form of Supply

For 34CrNiMo6 / 1.6582, we can supply the steel round bar, steel flat bar, steel sheet, plate and square block. Round bar can be sawn to your required length and size. Rectangular steel pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision finished bar and precision Steel plate to tight tolerances.

Engineering Alloy steel 34CrNiMo6 Applications properties

34CrNiMo6 / 1.6582 Steel used in the manufacture of tools for good plasticity and high strength. Usually choose a big size and important part, such as heavy machinery axle shaft, turbine blades and the high load of transmission parts, fasteners, crank shaft, gear, as well as loading part of the motor construction and so on.

Heat treatment of 34CrNiMo6 Alloy Engineering Steel| 1.6582 | 4337 -DIN 17200 EN 10083

As engineering steel, 34CrNiMo6 common make to Quenching and Tempered, Annealing, Normalizing, and other heat Treatment. Heat treatment data as below:

• Steel: 34CrNiMo6
• Thermal processing temperature / ℃: 1050 ~ 850
• The heat treatment temperature / ℃ | annealing: 650-700
• The heat treatment temperature / ℃ | normalizing: 850 to 880
• The heat treatment temperature / ℃ | quenching: 830 to 860 oil
• The heat treatment temperature / ℃ | Tempering: 540 to 680
• Hardness after annealing ≤HBS: 248
• Steel Dimensions / mm: ≤16
• After quenching and mechanical properties | σb≥ / MPa: 1200 ~ 1400
• After quenching and mechanical properties | σs≥ / MPa: 1000
• Mechanical properties after quenching | δ5≥ / (%): 9
• Mechanical properties after quenching | ψ≥ / (%): 40
• After quenching and mechanical properties | AKV①≥ / J: 40

Forging

Pre-heat, then heat to 900 to 1100 °C, Forging temperature no lower than 900 °C. the Forged Ratio no less than 4:1

34CrNiMo6 Steel Mechanical Properties

Q1:Do you accept customized orders?
A:Yes,just tell us your requirements

Q2:Which countries do you export to?
A:South,Africa,Zimbabwe,Uganda,Egypt,Korea,Southeast Asia,Colombia,Pakistan,India,Bengal,Brazil,etc.

Q3:Do you offer samples?
A:Yes,free samples can be provided and you only need to pay the postage.

Q4:How could you guarantee your products?
A:Mill Test Certification is supplied with shipment, We also accept and support the third-party inspection.We also could issue the warranty to customer to guarantee the quality.

Q5:How can I get the price of needed product?
A:It's the best way if you can send us the material, size and surface, so we can produce for you to check the quality.If you still have any confusion, just contact us, we would like to be helpful.

Q6: Why do you want to buy from us instead of from other suppliers?
A:We are a trading company, our own factory, dealing in steel materials, such as seamless steel pipe, welded pipe, square pipe, oil casing, round steel, steel coil, PPGI, steel plate. Welcome to our company product exhibition, looking forward to our perfect cooperation.

Jiangsu Mittel Steel Industrial Limited is  located in Wuxi City,  a beautiful city near Shanghai.  Wuxi is close to  Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transportation. , Wuxi become the biggest  stainless steel sheet ,plate and coil  supply Centers in China. Jiangsu Mittel Steel Industrial Limited was established in 1998 years. as one of the largest stockists and manufacturers of industrial grade Stainless Steel products and derivatives in Wuxi ,We keep a stock of 50000 tons every month, so we can delivery goods in fast time.

Our company supplies cold/hot-rolled stainless steel sheets,stainless steel coils and stainless steel Plate to many steel factories from athome and abroad, including Shanxi Taigang Iron& Steel CO, . Ltd (TISCO)Zhangjiagang Pohang (ZPSS), Shanghai BAO STEEL, Ningbo Baoxin and steel factories in Taiwan area, Mainland Chinese and foreign countries and regions. 

Our long-term business lines are 201.202.304(1.4301).304L.316.316L(1.4404).430.409L, 309S ,310S(1.4845).317L.904L.S31803(1.4462).S32750.S32760, Finish: 2B, BA, NO. 1 NO. 4, HL, 8K and so on...Meanwhile, our company is also engaged in the long-term supply of homemade & imported medium and thick plates, galvanized and carbon steel products. 

Adhering to the principle of "quality first and customer foremost",our company will offer long-term service to nationwide manufacturers of household appliances, elevators, tableware, ornaments, tanks and machines. We can offer precise frosted wiredrawing, 8K mirror finishing and skim board oil-abrasion of various specifications at any time. The precisely-processed products will meet your requirements for high quality. Our company is a modern enterprise integrating distribution and storage. 

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.