Galvanized Steel Peel & Press Insulation Hangers 50x50x2.7mm On Duct Or Wall Surface

Specifications Of The Peel & Press Insulation Hangers:

Peel & Press Insulation Hangers has a fabricated 2" x 2" metal base with self stick adhesive

on it and a pin. Peel the release paper from the metal base and firmly press the base to the

duct or wall surface. Once the insulation material is pierced onto the pins, a self locking washer

or a dome cap washer is needed to hold the insulation material in place.

The following are some popular sizes in the market, special size also could be customized.
Pin diameter	Base plate size	Insulatiion pin length
12ga, 3mm, 10ga	2 " square w / tape	1 "
12ga, 3mm, 10ga	2 " square w / tape	1 - 5 / 8 "
12ga, 3mm, 10ga	2 " square w / tape	2 "
12ga, 3mm, 10ga	2 " square w / tape	2 - 1 / 2"
12ga, 3mm, 10ga	2 " square w / tape	3 - 1 / 2"
12ga, 3mm, 10ga	2 " square w / tape	4 - 1 / 2"
12ga, 3mm, 10ga	2 " square w / tape	5 - 1 / 2"
12ga, 3mm, 10ga	2 " square w / tape	6 - 1 / 2"
12ga, 3mm, 10ga	2 " square w / tape	8 "
Advantages Of The Peel & Press Insulation Hangers: 1. The pins are riveted on the base of the insulation hangers, it's very strong. 2. The self adhesive tape on the base botom of the insulation hangers is very sticky. 3. The self locking washers are very hard, it could lock the insulation hangers very firmly.

Self Locking Washers For The Peel & Press Insulation Hangers:

Self Locking Washers Used To Fasten Peel & Press Insulation Hangers
type	size	material	center hole
round	25mm	galvanized steel, stainless steel, aluminum	2mm-5mm
round	30mm	galvanized steel, stainless steel, aluminum	2mm-5mm
round	32mm	galvanized steel, stainless steel, aluminum	2mm-5mm
round	38mm	galvanized steel, stainless steel, aluminum	2mm-5mm
square	32mmx32mm	galvanized steel, stainless steel, aluminum	2mm-5mm
square	29mmx31mm	galvanized steel, stainless steel, aluminum	2mm-5mm
square	38mmx38mm	galvanized steel, stainless steel, aluminum	2mm-5mm
square	50mmx50mm	galvanized steel, stainless steel, aluminum	2mm-5mm
square	65mmx65mm	galvanized steel, stainless steel, aluminum	2mm-5mm
dome cap	30mm	galvanized steel, stainless steel, aluminum	2mm-5mm
dome cap	32mm	galvanized steel, stainless steel, aluminum	2mm-5mm
dome cap	38mm	galvanized steel, stainless steel, aluminum	2mm-5mm
dome cap	40mm	galvanized steel, stainless steel, aluminum	2mm-5mm
dome cap	50mm	galvanized steel, stainless steel, aluminum	2mm-5mm

Technical Data Of The Peel & Press Insulation Hangers:

Foam Density: 182 kg/m3
Liner Release Value: 10N/m
Peel Adhesion(23℃): 20 N/25mm
Application Temperature: +10℃ - Advisory
Static Shear: >1000 Hrs(PSTC)
Service Temperature(Minimum): -35℃
Service Temperature(Maximum): +90℃
Tensile Strength: (L)113 N/m2 (CNS10487)(C)85N/m2
Elongation: (L)170% (CNS 10487) (C) 150%
Shelf Life: 2years (20℃ 65%RH)

Application Of The Peel & Press Insulation Hangers:

1. Pins are very sharp and easy go through any insulation. 2. Pins are soft and easy to be bent over 3. The tape has a good stickness, every pin could load 1.5kg 4. The tape can work at 5℃ - 80℃ 5. Usage Of The Peel & Press Insulation Hangers: > Peel & press insulation hangers can only be stuck on clean, dry and smooth surface. > Cleaning the surface is recommended, remove any duct, loose paint, oil etc. > Peel off the backing paper. > Place the peel & press insulation hangers in the required position. > Press the base against the cleaning surface. > Impale the insulation over the point of the peel & press insulation hangers. > Secure the insulation with the self locking washers > Bend or remove excess pins

Huihao Hardware Mesh Product Limited.

1. We choose the best quality materials for making insulation fasteners 2. We do copper plating, zinc coated and phosphating pretreatment for the raw material 3. We purchase the multi-station cold forging machine to ensure the better mechanical property of shear connector to match the standard (BS EN ISO13918:2008, AWS D1.1, etc.), or as per customer's special requirement. 4. We use the automatic riveting machine to install . 5. After rust prevention, HUIHAO insulation fasteners can suitable for long time ship on the sea. 6. Short delivery time because of our reasonable production flow management.

15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION

About HUIHAO

China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.

We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.

Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.

READ MORE

PACKAGING AND TRANSPORTATION

Standard packaging to ensure products arriving at destination in good condition