Manufacturer Customization Service Excavator Sliding Boom Construciton Work Heavy Machine Sliding Arm On Excavator For Sanny Hitachi Komatsu Etc

Manufacturer Yellow/Grey/Etc Excavator Sliding Boom Sliding Arm Of Excavator For Sanny Hitachi Komatsu Cat Etc

Zhonghe Machinery Product Catalog-Contact Sales Manager Aria Directly

Structure

A telescopic cylinder is installed in the upper sliding arm, the cylinder body is fixed on the lower fixed arm, and the cylinder piston rod is fixed on the upper sliding arm.

Its main components are: fixed body, moving body, slider, telescopic cylinder, etc.

Characteristic

Our sliding arms are extremely strong and can handle heavy loads and dig in hard soil with ease. The excavator sliding arm has a simple structure, low failure rate, easy maintenance, and longer service life. Under normal circumstances, as long as the sliding boom of excavator is maintained normally, the slider only needs to be replaced once a year, and other issues do not need to be considered. The sliding arm can be used for diagonal excavation or to provide support.

welcome to contact Aria for more models!

(Easy to maintain)

ZHONGHE silding arm adopt antiwear nylin sliding plates rather than traditional pulley, which can be replaced quickly and conveniently.

(Robust sliding structure)
1. The lower cover of the upper sliding arm and the upper cover of the lower fixing arm are both 20mm.
2. Cover plates are cut from a whole piece but not spliced, so as to be more firm and not easay to deform.

(Avoid oil leakage)

The double oil seal design for the built-in telescopic cylinder prevents hydraulic oil from leaking, prolongs the service life of the sliding cylinder

(Long service life)
1.Double limit design of the sliding cylinder prevents cylinder jolting and over pulling.
2.Steel sliders are welded between the skateboards to resists wear.

GOOD SERVICE:

1. Online support within 24 hours.

2. Appointment video technical support.

(Our engineers have focused on excavator boom and attachment over 10 years)

3. Long excavator boom shall be two/three jointed pcs to make it fittable into container to save shipping cost.

WARRANTY

6 months for sliding boom, 3 months for the bucket

Esteblished in 2018, Kaiping Zhonghe Machinery Manufacturing Co., Ltd., a manufacturing and trading combo, specializes in customizing different kinds of excavator boom arms and attachments