1.Place the knife holder on the table, hold the knife holder itself
with one hand, pull up with a little force with the other hand, and
then take out the plastic board behind the magnetic knife holder.
2.If it is installed on the refrigerator, you can directly connect
the knife holder to the surface of the refrigerator, and the
magnetic knife strip will be firmly adsorbed.
3.If you want to install the knife holder on the wall, you can
first confirm the position you need to install, and the horizontal
position of the two mounting screw holes on the wall,and you need
to use the recessed holes and drilled holes to make holes in the
wall.
4.Use the provided screws to screw the back plate into the wall
together, and fix the back plate on the wall.
5.Finally attach the magnetic knife holder to the back plate.
6.The Magnetic knife holder installation is complete.
Hazard Warning:
Be careful not to pinch your hand when attaching the magnetic knife
holder to the board!
