PVC V Bar for Cooling Tower Rigid PVC V-bar grid filler splash type cooling tower fill

Description:

The water droplets spread over the solid surface and perforated holes of the splash bar. The flowing water is held on the holes due to surface tension and forms a thin film. The water film formed over these rectangular holes has very low surface tension at its corners and thus a tendency to rupture frequently. During this process of rupturing the water film is broken into small globules, thus providing maximum heat transfer.

Features and Advantages

* Diamond shaped perforations are recommended as they offer the ideal surface tension to rupture the water droplets.
* The top edge of the V-bar is reinforced so as it offer bending and load strength..
* Ensuring a minimum thickness of 1.5mm and a maximum distance of 600mm between adjacent bars will help reduce the possibilities of sagging.
* Compact locking of the V-Bar on the grid using a V-Bar clip (as depicted in the picture) will also ensure a sturdy fill
structure.
* The overhang of the V-bar of the last grid should be restricted to 150mm.
* Algae resistant and Fire retardant