10.1'' 4 Wire Resistive Touchscreen With Black Bezel For Flush Mount EMI IMMUNITY Touchscreen Panel

10.1-Inch 4-Wire Resistive Touch Panel With Black Bezel For Flush-Mount EMI IMMUNITY Touchscreen Panel

Product Description

LBR4W101060 is a 4 wire resistive touch panel (RTP) for flush-mounted touch display panel or touchscreen computer. It features black bezel, similar structure design as flush-mounted projected capacitive (PCAP) touch panel, for flush mount. At first glance, you may not be able to distinguish the resitive touch panel from the capacitive touch panel due to the black border. When touching on it, you can feel the difference between the plastic and glass. The resistive touch panel surface is plastic material, PET with black ink silkprinted around the active area, while the PCAP touch panel's top layer is glass with black bezel.

The standard 10.1 inch 4 wire RTP is the same outline with the display panel, and our flush mounted RTP LBR4W101060 has a fixing area outside the display panel. It can be glued on the frame or assembled with adhesive tape. This touch panel's aspect ratio is 16:10 and its resolution is typically 1280x800 or 1920x1200. There is a 2.54mm pitch female connector for the male connector on the mainboard, and you can also connect it to the mainboard via a USB controller board with starndard USB-A interface.

LBR4W101060 supports single touch by pressure. You can press it with your finger, nail, stylus, card or any object. It is widely used on medical equipment and military devices which require high ESD and EMC test conditions. It has better noise immunity, and is resistant to water which highly reduces malfunction.

Feature

1. 4-Wire resistive Touch Panel

2. Blace Bezel

3. Single Touch

4. Activated by Pressure

5. EMI Immunity

6. Resolution: 1280x800, 1920x1200

7. Aspect Ratio: 16:10

8. USB Controller for opiton

Custom Service

LBR4W101060 is our standard 10.1-inch 4-wire resistive touch panel. We also provide custom service.

1. You can customize the dimensiones, the bezel color, the logo printed and etc.

2. You can use a resistive touch controller with USB-HID for fast install it on your device. You can use it after simple calibration.

3. The thickness can be customized to be 3mm.

4. For more durable resistive touch panel, you can select 5-wire technology.

5. For multi-touch, you can select our PCAP touchscreen overlay.

PRODUCTS LB SUPPLIES

Dongguan Linbo Optoelectronic Technology Co., Ltd. (LB) stands as a leading innovator in the field of touch display technology, projected capacitive (PCAP) touch panel technology and resistive touch panel (RTP) technology, dedicated to providing cutting-edge solutions for a diverse range of industries.

Located in Dongguan, China, LB has been supplying over 200 companies all over the world with reliable touch LCD panels, efficiently, cost-effectively and experiencedly for more than 10 years, including LCD panel with PCAP touch bonded, LCD panel with RTP bonded, LCD panel with cover lens bonded, LCD panel, PCAP touch, resistive touch, cover lens, touch sensor, AD board, touch controller, and related cables.

BONDING METHODS LB MASTERS

As an OEM factory, LB designs, manufactures and provides reliable solutions in touch LCD panel. It is equipped with over 1500m² clean rooms for manufacturing the touch panel and laminating touch panel to LCD panel. Tape bonding, OCA (optical clear adhesive) bonding and LOCA (liquid OCA) bonding are the 3 bonding methods that LB excels at and often does on request.

Tape bonding is most widely used, as it is efficient and cost-effective to integrate the touch panel to LCD panel. Double-sided adhesive tape is used for laminating the touch layer to display layer around the bezel. Therefore, there is an air gap between the touch and LCD panel. That’s why this technology is also called air-gap bonding.

OCA bonding is to optically bond the touch panel to no-metal-frame LCD panel with OCA on the whole surface. While most industrial grade LCD panel has metal frame when assembling the LED backlight. The distance from the viewing surface to the touch is about 0.5mm ~ 1mm. Common OCA thickness is 0.2mm, hence LOCA is utilized to fill the space from the LCD’s polarizer to the touch. OCA bonding and LOCA bonding are called optical bonding. There is no air gap between the touch and LCD, which is helpful to reduce light reflection and refraction caused by the air gap.

LCD PANEL

BOE, TIANMA, AUO, INNOLUX, LG are the main brands we recommend as per the working environment where the LCD panel is to be installed. The key parameters we consider are the working operating temperature, resolution, viewing angles, interface, dimensions, bezel, brightness, contrast, and LED lifetime and etc. The standard models are the first priority.

Customized LCD panels we can do include brightness enhancement, stretched LCD, square LCD, round LCD, interface, and connecting FPC, LED backlight.

PCAP TOUCH PANEL

LB’s PCAP touch panel is based on ITO technology. Our touchscreen sensor is consisted of ITO film or ITO glass optically bonded with cover lens. The cover lens can be glass (G) and plastic (P: Polycarbonate, PMMA, and PET). So the layers of our touch panel have GG, GFF, PFF. Basically, the glass features the surface hardness which is greater than 6H and the plastic features light weight and anti-vandal.

Customized PCAP touch panel:

• Can work long in the direct sunlight with anti-UV ink and anti-UV adhesive, and anti-IR filter.
• Can work with thick gloved hand.
• Can work in the rain or with water on the screen.
• Can work with 12mm thickness cover glass.
• Can work with stylus.
• The color, text, shape, outline, cover lens, sensor, FPC, layers can be customized on request or as per your working conditions.

RESISTIVE TOUCH PANEL

LB’s resistive touch panel is also based on ITO technology, basically, with top ITO film bonded with bottom ITO glass. We have 4 wire and 5 wire resistive touch panel available with hundreds of standard models. They are pressure-driven touch panel, supporting single-touch with stylus, pen, card or nail input.

Our flush mount type of resistive touch panels stands out of the ordinary embedded touch panels with resistive technology. It features black bezel for flush mounting, which is used for assembling on the enclosure.

OPERATION PHILOSOPHY

LB is focused on assisting clients to solve the components of touch LCD panel, continuously providing competitive service and products with effective hardworking, and hunting for better future based on healthy, strong and long-term cooperation with mutual benefit.