PLC Control Temperature Humidity Test Chamber High performance

Temperature and Test Chambers Overview

1.structure Model:

Unitary.Test room is on the top, refrigerator is in the bottom; Power distribution control in the back; Main control panel in the front door, and the extended one is on the right-back side. Door opens from right to left. Air circulation channel and air conditioning system are at the back of test space:(centrifugal fan blade,air flow guiding device,heater,humidifier,Refrigeration heat exchanger,Temp and humidity sensing device

2.Composition:

2.1 Exterior material: Both sides static coated cold rolled steel

2.2 Interior material: SUS304 Stainless steel

2.3 Insulation material: Rigid polyurethane foam insulation layer

3.Load-bearing:

3.1 Shelves load capacity:≤40Kg(averagely loaded)

3.2 Test case frame bearing capacity:≤20Kg(averagely loaded)

3.3 Test space total load weight(shelves and bottom)≤50kg

4.Chamber door:

4.1 Single door with hinges on the left;

4.2 Door size:580×750 mm(W×H);

4.3 Silicon rubber equipped and heating system inside for anti-condensation;

5.Observation window:

Size:280×400mm(W×H), coated heating anti frost hollow glass

6.Cable ports:

2 ports with Φ50 mm on left and right sides, with screw caps and Soft silicone plugs.

7. Headlamp:

In the observation window

8 . Shelves

2 shelves inside for samples; height adjustable

9. Drain Holes

Condensate water drain holes for condensate water outside

10.Spill Port

Located at the back of case for condensate water discharging

11.Mobile Castors

Strong adjustable wheels

For over 20 years, Envsin has been a trusted provider of environmental simulation and reliability testing solutions. We’ve served more than 170 Fortune 500 companies and over 1,000 small and medium-sized enterprises across 37 countries worldwide. Our expertise spans the development and production of standard and custom testing chambers, including constant temperature and humidity chambers, high and low temperature chambers, thermal shock chambers, aging chambers, and large-scale walk-in chambers. We also specialize in complex environmental testing chambers for salt spray, dust, water resistance, rain, light exposure, pressure, and more.

Guided by the principles of dedication, professionalism, innovation, and excellence, Envsin is committed to creating a sustainable future through advanced testing solutions. Our team is focused on becoming a global leader in the industry, advancing technological progress, and consistently contributing to the development of the instrument testing sector.