Types of rail gauge rods
As a professional manufacturer of rail gauge tie rod, GNEE Rail can supply standard gauge rods for 56-½" track and rails of 60-140 lbs, for both non-insulated and insulated type, with approved certificate of ISO9001:2008 and CRCC authorization. Besides, we produce various kinds of gauge tie rods, such as AREMA 1-1/4 "insulated gauge tie rod, and other gauge rod used in UIC, BS rails, with length of 600mm, 762mm, 900mm, 1435mm, etc.
Standard Gauge Rod
A standard gauge rod with two ends includes components of 1pcs rod, 4pcs iron card, 4pcs flat washer, 4pcs nuts, 4pcs spring washer, no matter for non-insulated, or insulated types.
| No. | Part | Quantity | Specification | Material |
| 1 | rod | 1 | M30 M36 | 3# |
| 2 | iron card | 4 | I type II type | KTH350-10 |
| 3 | plain washer | 4 | M30 M36 | 3# |
| 4 | nut | 4 | M30 M36 | 3# |
| 5 | spring washer | 4 | M30 M36 | 65Mn |
Application: 43,50,60,75kg/m rail
Operating temperature: -40~60 degrees Celsius
Standard: TB/T1780-86
Non-standard gauge tie rod
It is to be produced by customizing depending on customers’ drawings and specific requirements.
We make gage rods in single end and double end styles with both offered in insulated and non-insulated versions. Our insulated gage rods are made with GPO-3 fiberglass based insulation for the best electrical resistance and minimum water absorption. We also manufacture 3/4" and 1" gauge rods for your smaller rail sizes and special track gages.
