400X500MM 100% 3K Carbon Fiber Plate Panel Board 0.5-4MM Thickness Sheet

400X500MM 100% 3K Carbon Fiber Plate Panel Board 0.5-4MM Thickness Sheet

LIJIN Trusted and Professional Supplier of Carbon Fiber Sheets

LIJIN premium quality carbon fibre sheet manufactured using 100% high-strength carbon fibre reinforcement and epoxy resin with a smooth, glossy, cosmetic quality carbon fibre finish on both sides.

Suitable for a huge range of structural and cosmetic applications within motorsport, marine, shopfitting, exhibitions, automation, medical, scientific and many more.

• Lightweight: Carbon fiber is 5 times lighter than steel (ASTM-A1008) and almost 2 times lighter than aluminum when comparing similar-sized pieces.
• High Strength & Stiffness: Carbon fiber reinforced polymer (CFRP) has the highest specific strength and modulus (stiffness) per density compared to metal, plastic ,and wood.
• Low Thermal Expansion: When metal is exposed to heat, it will expand and weaken which can cause issues and possible failure of the part. Carbon fiber has low thermal expansion.
• Low Thermal Conductivity: Metal acts as a conductor, aluminum more than steel, which can transmit or radiate heat to its surroundings and cause heat soak. Carbon fiber has low thermal conductivity.
• RF Shielding: Carbon Fiber works well to attenuate, or block radio frequency waves, protecting your devices from scanners or people trying to access your data.

Features

• 100% 3K Carbon Fiber Strong Strength and Light Weight.
• Perfect for any application including RC, drones, helicopters, etc.
• The surface is a cross-grain, matte surface without any glass fiber contents.
• These carbon fiber sheets contain 100% carbon fiber imported from Japan.
• It is especially applicable for Multicopter, Helicopte,r and RC airplanes.

【MULTIPURPOSE CARBON FIBER SHEET】With a wide variety of applications, carbon fiber sheet can be used to give your car a makeover, used as a fixed support plate in your workshop, to line gear fixing plates, or to create accessories like cardholders with unique & texture – you can use them in model planes and cars too.
【HIGH-PERFORMANCE DESIGN】Featuring a smooth matte finish of 3K carbon with a twill weave, this sheet carbon fiber is lightweight & waterproof, offers superior performance, and is manufactured in compliance with leading industry standards.
【STRONG & MATERIAL】Made from high-quality real carbon fiber, our carbon sheets are super stiff, sturdy, lightweight, will not tear or rip easily, and are sure to last you for many years to come – The carbon fiber sheet has high strength and only one-fifth of the quality of steel.
【5 THICKNESS OPTIONS】Our carbon fiber plates are available in 5 different thickness variants of 0.5mm, 1mm, 1.5mm, 2mm, and 3mm carbon fiber and are sure to fulfill all your requirements and needs. Find the right sized sheet for your project needs, strike a balance between strength and pliability, and do some amazing DIY work easily.
【EASY TO CUT FINISH】You can easily cut out the shape that you require without much effort as the material is easy to work with yet very strong. Cut with and obtain fine straight edges without burs with our carbon fiber flat sheets.

Carbon Fiber Sheet Plate Specification:

Due to the high stiffness, high tensile strength, low weight, high chemical resistance, high-temperature tolerance, and low thermal expansion of the carbon fiber material, it is widely used in some specialized and high-performance products. Such as aerospace, RC Drones, RC Helicopters, RC cars, UAVS, car decorations, Sports equipment and musical instruments, etc.

LIJIN carbon fiber sheets contain 100% carbon fiber imported from Japan. We have two versions of the carbon fiber plates: twill weave matte surface and plain weave glossy surface. We also provide different sizes of carbon fiber sheets for customers, such as 200x300mm, 100x250mm, 300x400mm, 400x500mm, 500x500mm and 500x600mm sizes. The thickness is from 0.5mm to 6mm for choice. In the past few years, our carbon fiber plates have been trusted and supported by many customers.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.