20T Well Water Filtration System, Water Output Per Hour 20000L/H
Basic parameters of a 20-ton (T) well water filtration system.
Here is a detailed description of the system:
1. Water production capacity: The system is designed to produce
20,000 liters of water per hour, or 20 cubic meters (m³), which
indicates that it is a high-capacity filtration system suitable for
occasions where large amounts of filtered water are required.
2. Power: It is marked as 0 watts (W), which may mean that the
system does not contain electrical components, or the power of the
electrical components is so low that it is not specifically
mentioned in the specifications.
3. Power requirements: The system can adapt to 220-380 volt power,
which increases its applicability in different regions and under
different power conditions.
4. Dimensions: The dimensions of the system are 2600 mm long, 1200
mm wide, and 2500 mm high. This larger size indicates that it is an
industrial-grade filtration system.
5. Working principle: Although no specific filtration technology is
provided, well water filtration systems usually include
pre-treatment (such as sand filtration, activated carbon
filtration, etc.) to remove large particulate matter and chemicals,
and possible deep filtration or reverse osmosis steps to further
purify the water.
6. System composition: may include multiple filtration stages, such
as coarse filtration, fine filtration, activated carbon filtration,
possible reverse osmosis or ultrafiltration units, etc.
7. Application scenarios: suitable for industrial water,
agricultural irrigation, large community water supply, commercial
water and other occasions.
8. Maintenance: regular maintenance is necessary, including
replacing filter elements, checking the integrity of pipelines,
cleaning and disinfection, etc., to ensure water quality and system
performance.
9. Technical parameters: when selecting a system, technical
parameters such as water output, power requirements, size, working
principle, system composition, etc. should be considered to ensure
that the system meets specific production or use requirements.
10. Installation and commissioning: the system installation should
follow relevant specifications to ensure that the process
parameters meet industry standards. Please note that if the power
is 0 watts, the system is completely manually operated. If
necessary, please contact us for communication
........................................................................................................................................................................................................................................
........................................................................................................................................................................................................................................
Note: Due to product specificity need to buy the pro please contact
our customer service, customer service will be based on the pro's
water consumption and water quality problems to recommend the right
products to the pro, in order to avoid unnecessary future trouble
please do not blindly buy equipment, such as the need for specific
details of the specifications and parameters or picture trouble pro
contact customer service, we will answer the pro's questions, thank
you for the pro's support of the net environmental protection,
thanks!
304 Stainless Steel Cement Sand River Well Water Bath Filtration
