Laundry Detergent Wastewater Treatment Chemicals 55295 98 2

Appearance:

Colorless and Translucid Liquid

Solid Content:

50%min

Viscosity(25°C, cps):

50-300

PH Value (30% Water Solution):

3-6

Specific Gravity (at 20°C):

1.1-1.3

Water Solubility:

Completely Soluble With Water at Any Rate

Package:

30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum

Storage Temperature:

Room temperature

1

High performance treating high-colority effluent from textile dyeing mills, pigment mills, printing ink and paper mils.

2

As flocculant to de-color high-colority effluent from dyestuffs processing plants.

3

Stronger decolorization (50%~99%) and removal of COD (50%~80%).

4

Can ben used as retention agent in the paper & pulp processing

5

Faster sedimentation, better flocculation.

6

Non-pollution (no aluminum, chlorine, heavy metal ions etc.).

7

It can be used before or after biological treatment.

8

Less sludge produced than other inorganic coagulants.

1

Before use, to make BWD-01 with fresh water 40-50times, to have 2-2.5% concentration solution.

2

Make PAC solution with 2-5% Al2O3 content.

3

Make solution of Anionic flocculant with 0.1% concentration.

4

It is very important, to adjust the effluent pH value to 8-10, higher or lower pH, BWD-01 works not well.

5

Add PAC solution, mix with effluent completely. about 1-3 minutes

6

Add BWD-01 solution, mix with effluent completely, about 5-10 minutes

7

Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is suggestion)

8

Sedimentation

9

Check color for treated effluent

10

Adjust dosage of BWD-01 and PAC to do more test to have better testing result.

1. Packed in 30kgs, 50kgs, 250kgs net plastic drums and 1250kgs net IBC drums, or others according to the requirements of clients.
2. Suggested to store in room temperature, would show slightly stratification or appear white at low temperature, cannot be placed in the sun.

Bluwat Chemicals is a professional supplier of water treatment chemicals in China. We provide our customers with both traditional and innovative products to ensure optimum control in a wide variety of applications, which include treatment of drinking water, wastewater, process water. We are trying our best to be a professional manufacturer and service supplier to reduce your treatment cost.

Our core products are coagulants and flocculants for water treatment and polymers for oil/gas drilling and EOR (enhanced oil recovery).

E-Business model and operation is the core value of Bluwat Chemicals, quick feedback, high efficiency, low operation cost, it is easy to establish cooperation relationships with partners all over the world. In the past 15 years, we sold more than 400,000 tons of our products to around 80 countries and regions.

Now, we are the Top manufacturer of BWD-01 Water Decoloring Agent in the world.

We built and invested 3 modern chemical plants in the past 10 years:

1. Bluwat Plant in Yixing in 2004: Leading and professional producer of BWD-01 Water Decoloring Agent, liquid polymer like PolyDADMAC, Polyamine etc.
2. Bluwat Plant in Zibo in 2006: Producing PAC with different grades, ferric sulphate powder and granule.
3. Bluwat Plant in Haibei in 2007: It is a Top 5 manufacturer in China, producing Polyacrylamide powder and emulsion with all grades.

We have professional technical teams to support our products innovation and quality control.

Welcome to visit our plants, and have a win-win cooperation together!

Blue Water, Green Life!