Loop Coil Vehicle Detector Loop Coil Sensor UL1332 Certified

Loop Cable for Loop Detectors Underground -40~200℃ with UL1332 certified

JUTAI Loop coil has UL1332 certified.

• Excellent corrosion resistance, oil resistance, strong acid and strong alkali resistance to high voltage
• Small loss at high frequency, no moisture absorption, high insulation resistance
• Excellent flame resistance, aging resistance, and long service life
• Anti-corrosion, anti-combustion, perfect insulation, acid-alkaline resistant

All permanent loop installations should be installed in the roadway by cutting slots with a masonry cutting disc or similar device. A 45° crosscut should be made across the loop corners to reduce the chance of damage that can be caused to the loop wire insulation at right angle corners.

Loop Detectors: Used to detect the presence of vehicles. The loop is connected to the detector.

Exit Loops: Used to open gates to allow a vehicle's exit.

Safety Loops: Used to prevent a gate from closing on a vehicle. Two loops can be wired to one detector. This is frequently the case in safety loops. Loops are placed in front of and behind the gate.

Shadow Loops: Typically used in commercial locations. They close the gate as soon as a vehicle passes over them deterring other vehicles from tailgating in behind them.