UB800-18GM40-U-V1 Pepperl+Fuchs Brand New In Box Fast shipping 1year warranty 100% Original

Ultrasonic sensor UB800-18GM40-U-V1 < Short design, 40 mm < Function indicators visible from all directions < Analog output 0 ... 10 V < Measuring window adjustable < Program input < Temperature compensation Single head system Dimensions 10 M18 x 1 M12 x 1 4 24 24.5 LED 39.2 50.2 Technical Data General specifications Sensing range 50 ... 800 mm Adjustment range 70 ... 800 mm Dead band 0 ... 50 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 255 kHz Response delay approx. 100 ms Indicators/operating means LED green Power on 1 Release date: 2023-11-- 07 Date of Release date: 2023-11-07 Date of issue: 2023-11-07 Filename: 205336_eng.pdf Pepperl+Fuchs Group Germany: +49 621 776 1111 Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091 www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com Technical Data LED yellow solid yellow: object in the evaluation range yellow, flashing: program function, object detected LED red solid red: Error red, flashing: program function, object not detected Electrical specifications Operating voltage UB 15 ... 30 V DC , ripple 10 %SS No-load supply current I0 ≤ 20 mA Input Input type 1 program input lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB input impedance: > 4.7 kΩ, pulse duration: ≥ 1 s Output Output type 1 analog output 0 ... 10 V Default setting evaluation limit A1: 70 mm evaluation limit A2: 800 mm Resolution 0.4 mm at max. sensing range Deviation of the characteristic curve ± 1 % of full-scale value Repeat accuracy ± 0.5 % of full-scale value Load impedance > 1 kOhm Temperature influence ± 1.5 % of full-scale value Compliance with standards and directives Standard conformity Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 Approvals and certificates UL approval cULus Listed, Class 2 Power Source CCC approval CCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Connection type Connector plug M12 x 1 , 4-pin Housing length 40 mm Housing diameter 18 mm Degree of protection IP67 Material Housing brass, nickel-plated Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT Mass 25 g Connection 3 (BU) 1 (BN) 2 (WH) 4 (BK) U + UB Teach input Analogue output - UB Core colours in accordance with EN 60947-5-2. Standard symbol/Connections: (version U) Ultrasonic sensor UB800-18GM40-U-V1 Release date: 2023-11-07 Date of issue: 2023-11-07 Filename: 205336_eng.pdf 2 Pepperl+Fuchs Group Germany: +49 621 776 1111 Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091 www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com Connection Assignment 1 3 2 4 1 BN 2 WH 3 BU 4 BK Wire colors in accordance with EN 60947-5-2 (brown) (white) (blue) (black) Characteristic Curve Characteristic response curve Distance X [mm] Distance Y [mm] Curve 1: flat surface 100 mm x 100 mm Curve 2: round bar, Ø 25 mm 0 200 400 600 800 1000 1200 1400 200 150 100 50 0 -50 -100 -150 -200 2 1 X Y Programming the analog output mode Rising ramp A1 < A2: Falling ramp A2 < A1: object range A1 -> ∞, A2 -> ∞: Detection of object presence Object detected: 10 V No object detected: 0 V A1 A2 A2 A1 Programming The sensor features a programmable analog output with two programmable evaluation boundaries. Programming the evaluation boundaries and the operating mode is done by applying the supply voltage -UB or +UB to the Teach-In input. The supply voltage must be applied to the Teach-In input for at least 1 s. LEDs indicate whether the sensor has recognized the target during the programming procedure. Note: Evaluation boundaries may only be specified directly after Power on. A time lock secures the adjusted switching points against unintended modification 5 minutes after Power on. To modify the evaluation boundaries later, the user may specify the desired values only after a new Power On. Note: If a programming adapter UB-PROG2 is used for the programming procedure, button A1 is assigned to -UB and button A2 is assigned to +UB. Ultrasonic sensor UB800-18GM40-U-V1 Release date: 2023-11-07 Date of issue: 2023-11-07 Filename: 205336_eng.pdf 3 Pepperl+Fuchs Group Germany: +49 621 776 1111 Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0001 Singapore: +65 6779 9091 www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com Programming Programming the analog output Rising ramp 1. Place the target at the near end of the desired evaluation range 2. Program the evaluation boundary by applying -UB to the Teach-In input (yellow LED flashes) 3. Disconnect the Teach-In input from -UB to save the evaluation boundary 4. Place the target at the far end of the desired evaluation range 5. Program the evaluation boundary by applying +UB to the Teach-In input (yellow LED flashes) 6. Disconnect the Teach-In input from +UB to save the evaluation boundary Falling ramp 1. Place the target at the far end of the desired evaluation range 2. Program the evaluation boundary by applying -UB to the Teach-In input (yellow LED flashes) 3. Disconnect the Teach-In input from -UB to save the evaluation boundary 4. Place the target at the near end of the desired evaluation range 5. Program the evaluation boundary by applying +UB to the Teach-In input (yellow LED flashes) 6. Disconnect the Teach-In input from +UB to save the evaluation boundary Ultrasonic sensor UB800-18GM40-U-V1 Release date: 2023-11-07 Date of issue: 2023-11-07 Filename: 205336_eng.pdf 4 Pepperl+Fuchs Group Germany: +49 621 776 111

Mengchuan Instrument Co., Ltd. is located in Liushi Town, Yueqing City, Wenzhou, Zhejiang Province, surrounded by the beautiful world natural and cultural heritage - Yandang Mountain! It is mainly engaged in 2000 differential pressure gauge, red oil differential pressure gauge, pressure differential pressure transmitter, liquid level transmitter, diaphragm pressure gauge, shockproof pressure gauge, electric contact pressure gauge, stainless steel pressure gauge, precision pressure gauge, micro pressure capsule gauge, floating ball liquid level gauge, floating ball switch, liquid level controller, intelligent energy gauge, light column gauge and other products. The products are widely used in machinery and civil industries such as plastics, food, printing, chemical industry, petroleum, medical treatment, oven, light textile, printing and dyeing, air conditioning, family and so on.

The company adheres to the business philosophy of "customer first, forge ahead" and adheres to the principle of "customer first" to provide our customers with high-quality services. Welcome!