Product Details
Company Profile

Scrap Aluminum Pre Shredder Metal Frame Shredder Equipment Waste Aluminum Recycling Machine

Products Description

In the industrial chain of aluminum resource recycling, the scrap aluminum pre-crushing and shredding machine is at a key front-end position. Its efficient processing capacity and fine crushing effect lay a good foundation for the subsequent aluminum recycling process. The scrap aluminum pre shredder machine has two knife shafts equipped with special knives, which rotate in opposite directions at high speeds under the drive of the motor and the reducer. When the scrap aluminum material enters the crushing chamber, it is first subjected to the strong shear force between the knives, and the large pieces of scrap aluminum are initially cut off like giant scissors. As the knife shaft rotates, tearing and squeezing actions are also generated between the knife and the scrap aluminum. For scrap aluminum with a harder texture or complex shape, such as aluminum alloy wheels, scrap aluminum mechanical parts, etc., the torque of the knife shaft will play a role, and through continuous squeezing and twisting, it will be gradually disassembled and torn into small pieces. Some equipment is also equipped with an impact device. The high-speed rotating impact hammer will impact the scrap aluminum entering the specific area, further accelerating the crushing process and making the material reach the required particle size faster.

Technical advantages of scrap aluminum pre shredder machine:
Efficient crushing: The advanced knife design and reasonable knife shaft speed match greatly improve the crushing efficiency of the equipment. For example, the cutting edge shape of the new tool has been optimized, which has low cutting resistance and fast cutting speed when shearing scrap aluminum. Compared with traditional equipment, the processing volume per unit time can be increased by 30% - 50%. At the same time, the multi-axis collaborative working mode increases the number of times the material is crushed in the crushing chamber, further ensuring the crushing effect.
Energy saving and consumption reduction: The combination of efficient and energy-saving motor and reducer is used to accurately control the operating power of the equipment. When it is idling or lightly loaded, the motor automatically reduces the output power to avoid energy waste; when processing high-hardness and large amounts of scrap aluminum, it can instantly output strong power. Through the intelligent control system, the energy consumption of the equipment is reduced by 20% - 30% compared with similar products, effectively reducing production costs.
Environmental protection design: The overall equipment adopts a sealed structure to reduce the spillage of dust during the crushing process.

The cutter of the scrap aluminum pre-shredder is the core component of the scrap aluminum pre-shredder, and its wear directly affects the performance of the equipment. Check the wear degree of the cutter regularly, and repair or replace it in time when the wear of the cutter edge exceeds a certain limit. The worn cutter can be repaired by surfacing technology to restore the sharpness and strength of the edge. At the same time, according to the characteristics of processing scrap aluminum, choose the appropriate cutter material and cutter combination to extend the service life of the cutter.

Product Paramenters

model	size(mm)	Shredder room(mm)	Blads(mm)	motor(k)	weight(kg)
XD-600	2800×1300×1850	600×480	200	11×2	2200
XD-800	3000×1300×1850	800×480	200	15×2	2500
XD-1000	3300×1900×2200	1000×690	300	22×2	5200
XD-1200	3600×2000×2200	1200×690	300	30×2	6400
XD-1500	4180×2100×2400	1500×850	550	55×2	9000
XD-1800	5800×2400×3300	1800×1206	550	75×2	13600
XD-2000	6400×2700×3500	2000×1490	600	90×2	20100
XD-2500	7500×3200×3800	2500×1800	600	110×2	25000
Notes: 1. The number of blade claws, diameter, and thickness can be customized according to the type of material and the size of the discharge. 2. The output of the equipment will be different depending on the type of material and the size of the discharge. 3. More information please contact us, we can custom the product on your request.

Product Application

The scrap aluminum recycling shredder is mainly suitable for processing various waste materials containing aluminum. These materials include but are not limited to aluminum chips, aluminum alloys, aluminum profiles, aluminum plates, scrap aluminum, aluminum waste, aluminum-plastic plates, aluminum wires, aluminum cans, aluminum plate scraps, aluminum castings, raw aluminum, aluminum pipes, scrap aluminum wires, aluminum molds, stamped aluminum sheets, aluminum scraps, scrap automobile wheels, motorcycle engines and other waste containing aluminum parts, etc.

Application scenarios of scrap aluminum pre-shredder:
Scrap aluminum recycling plant: As the core pre-treatment equipment, it performs the initial crushing of various mixed scrap aluminum recovered. The scrap aluminum of different shapes and sizes is uniformly processed into suitable particle sizes, which is convenient for subsequent sorting and classified smelting according to the purity and alloy composition of aluminum, and improves the production efficiency and aluminum recovery rate of the entire recycling plant.
Automobile dismantling industry: With the trend of lightweight automobiles, aluminum is more and more widely used in automobile manufacturing. During the automobile dismantling process, the scrap aluminum pre-crushing shredder can quickly break the aluminum parts on the car, such as engine radiator, body aluminum plate, wheel hub, etc., into small pieces, which is convenient for subsequent separation from other parts and waste materials, so as to achieve the recycling and reuse of aluminum resources and reduce the impact of automobile dismantling waste on the environment.

Electronic waste processing enterprises: Electronic equipment contains a large number of aluminum components, such as computer cases, mobile phone cases, electronic radiators, etc. This type of scrap aluminum is often mixed with other metals, plastics, circuit boards, etc. The pre-crushing shredder can initially separate and crush it, which facilitates the subsequent further purification of aluminum by physical or chemical methods, helps the efficient recovery of aluminum resources in electronic waste, and reduces the potential harm of electronic waste to the environment.

The process flow of scrap aluminum recycling production line:
1. Feeding: Feed scrap aluminum products into the feed port of the shredder.
2. Shredding: The scrap aluminum products are shredded into small pieces or particles in the shredding chamber through the shearing, squeezing and tearing of the blades.
3. Screening: Fragments of different sizes can be separated through the screen as needed.
4. Magnetic separation: Iron impurities are separated through magnetic separation equipment to ensure the purity of the crushed materials.
5. Storage and transportation: The crushed scrap aluminum products are stored or transported to the recycling station for reuse.

Case:

Product Tags:


*From:	Your email address is incorrect!
*To:	Henan Xrido Environmetal Protection Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Aluminum Shredder
Brand Name:	Xrido
Model Number:	1600/Customizable
Certification:	CE ISO TUV
Payment Terms:	L/C,D/A,D/P,T/T,Western Union,MoneyGram,Negotiable
Delivery Time:	2-30 Working Days
place of origin:	Henan, China
core components:	PLC, Engine, Bearing, Gearbox, motor, Pressure vessel, Gear, Pump
material / metal processed:	Stainless Steel, Brass / Copper, Carbon Steel, Aluminum, Alloy
power (kw):	55
weight (kg):	5000
key selling points:	High Productivity
Product name:	Two Shaft Waste Recycling Shredder Machine
Input Size:	200-2200mm
Advantage:	Easy Operation High Efficiency
Final product:	standard-reaching rate is higher than 95%.
Usage:	e-waste, plastic, metal, wood, waste rubber,copper,wood,fabric
Parts:	Custom knife shaft and screen
Final product size:	1-10 Cm
Color:	Customer's Requirement
Machine Type:	Support Customization


Waste Metal Recycling System	Electronic Waste Recycling System

Solid Waste Disposal System	RDF Briquetting System


Scrap Metal Shredder Sorting Line	Waste Aluminum Crushing Production Line

Water Radiator Crushing Sorting Line	UBC Aluminum Cans Decoating Machine