Sign In | Join Free | My benadorassociates.com
benadorassociates.com
Products
Search by Category
Home >

Stryker RemB Electric Sagittal Saw 6400-034-000 Good For Repairing

Categories Used Patient Monitor
Brand Name: Stryker
Model Number: 6400-034-000
MOQ: 1pcs
Payment Terms: T/T, Western Union,Paypal
Delivery Time: 3-5 working days
Packaging Details: Carton
Product Name: Stryker RemB Electric Sagittal Saw 6400-034-000 Good For Repairing
Brand: Stryker
Model No: RemB Electric Sagittal Saw (REF 6400-034-000)
Dimensions: 5.3 inch [135 mm] length 0.79 inch [20 mm] diameter
Mass: 0.33 lb [0.150 kg]
Speed: 25000 cpm
Excursion: 5 degree arc
Mode of Operation: Non-continuous Operation
Power Supply: Stryker CORE 2, CORE, or TPS Console 40 V
MOQ: One piece
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
  • Product Details
  • Company Profile

Stryker RemB Electric Sagittal Saw 6400-034-000 Good For Repairing

Stryker RemB Electric Sagittal Saw 6400-034-000 Good


Brief Introduction of Stryker RemB Electric Sagittal Saw 6400-034-000 Good


The RemB Electric Sagittal Saw is compatible with the Integrated Operating Room Equipment (CORE) system.


The RemB Electric Sagittal Saw can be used with a variety of cutting accessories for surgical procedures involving cutting bone and hard tissue. These include, but are not limited to, applications in orthopedics, dentistry, ENT, neurosurgery and endoscopy.


The device can also be used with the Full Performance system.


Specification of Stryker RemB Electric Sagittal Saw 6400-034-000 Good


Product Name

Stryker RemB Electric Sagittal Saw 6400-034-000 Good


BrandStryker
Model no

RemB Electric Sagittal Saw

(REF 6400-034-000)


Dimensions

5.3 inch [135 mm] length

0.79 inch [20 mm] diameter


Mass0.33 lb [0.150 kg]
Speed25000 cpm
Excursion5 degree arc

Mode of

Operation


Non-continuous Operation
Power Supply

Stryker CORE 2, CORE, or TPS Console

40 V




A Blade Mount

B Button

C Cord Receptacle

D Applied Part – The distal end of the handpiece and the cutting accessory (as defined by the Product Safety Certification standards listed in the Specifications section of the instructions for use supplied with the console.)


To operate the Handpiece


Note: For more information on using the Handpiece , refer to the instruction manual included with the corresponding console.


1. Connect one end of the power cord to the Handpiece jack and the other end to the corresponding console jack.


2. Use the console to program the Handpiece operating parameters as needed.


3. Use the hand controller or the foot pedal to operate the Handpiece


Note: Use the console's touchscreen to assign different functions to the foot pedal as needed.


To Install a Cutting Accessory


1.Insert the blade into the gap in the blade mount

2. Fully depress the button and seat the blade against the post.Release the button


3.Rotate the blade against the post until it snaps into the desired location. If necessary, depress the button again to reposition the blade.

4. Gently tug the blade to verify the blade is secure.

5. To index the blade mount, pull out and rotate the blade mount until it snaps into the desired location.

NOTE: The blade mount will index in 45-degree increments, or eight possible locations.



Thank you so much for your attention .If you're interested in Stryker RemB Electric Sagittal Saw 6400-034-000 Good For Repairing ,feel free to contact us .Thank you .


Buy Stryker RemB Electric Sagittal Saw 6400-034-000 Good For Repairing at wholesale prices
Send your message to this supplier
 
*From:
*To: China World Technology Medical Equipment Service Group
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0