High Flow Compact Size 220 Volt 60L/min Electric Oil Portable Diesel Fuel Transfer Pump

High Flow Compact Size 220 Volt 60L/min Electric Oil Portable Diesel Fuel Transfer Pump

Precautions

1. Not suitable for refueling low ignition gasoline, alcohol, liquefied gas, and high viscosity engine oil
Before use, it should be confirmed whether the power supply matches the voltage of the oil pump.
3. The power supply of a DC pump can be divided into (+) and (-) levels, with the red line indicating the positive pole. Otherwise, the oil pump will reverse and no oil will be discharged.
4. The inlet and outlet pipes should follow the arrows, and there should be no air leakage in the inlet pipes and joints to ensure suction.
5. Remember to install a matching filter screen on the oil inlet pipe to avoid hard debris from entering the pump chamber and damaging the pump core. The blades should be regularly cleaned of dirt on the surface of the filter screen, otherwise blockage of the filter screen can easily cause reduced flow and pump damage.
6. The oil pump can work continuously and should not idle for more than five minutes without oil to avoid damage to the pump core, oil seal, and blades due to friction and heat generation.
7. It is not allowed to modify, disassemble, or extend the power cord without authorization. 8. If the power supply uses a battery, please ensure that the battery is fully charged,