RELLE Environmental Protection Wood Grain Floor With Impact Sound Insulation

Adopting high-definition synchronous embossing technology, the natural texture of oak is perfectly reproduced, and the touch is real and delicate. It reaches the commercial standard of EN13329, and is perfectly adapted to the crowded environment such as shopping malls and exhibition halls.

TVOC's 28-day release (AgBB test) is only 11 μ g/m, which is far below the international standard, ensuring indoor air quality and health.

The color fastness to light reaches grade 6 (the highest grade), and the color of wood grain can still be kept bright after long-term use.

Perfect for floor heating system, can withstand continuous heating at 27℃ at the highest, and has excellent thermal stability without deformation.

Adhesive

Specification:

24kg per bucket

Usage:

1 bucket used for 70 square meters ground

Specification:

25kg per bag

Usage:

1 bag used for 5 square meters ground

Specification:

20kg per bucket

Usage:

1 buccket usefor 180 square meters ground

Specification:

Tool rest: zinc alloy/stainless steel

Usage:

Push the cutter head to unlock, insert the trapezoidal blade, adjust the required length and lock it.

If it steel base, how to fix with our PVC floor?

Rust removing firstly, and then make one layer of Epoxy finish(mixing with Quartz
sands.When epoxy floor becomes dry, just make one layer of two component self-leveling ;
If temperature is not too high or low, just need use AB-C2(T158) on self-leveling. If the
steel ground is not embossing texture, make sure not rusty, then can choose two kinds of
adhesive : AB-C2-1 (T330S) or two component adhesive (absorbingbase ground or in
absorbing both are available).

Is this kind of LVT easy for maintenance ? if damaged, repairement is easy?

Yes, maintenance is easy; LVT is quite diffict to be scratched based on strong hardness and
thick wear layer. If it is damaged , we just need take out one single piece , then coating
adhesive to fix another one again,verynice.

Do you have clients in South America?

Yes, There are so many clients in South America , especiallyfor Brazil, Chile, Mexico,
Panama , Colombia , Venezuela ,Argentina, Ecuador , Trinidad ,Peru etc.

How about LVT characteristics?

1. Easy installation with Relle right adhesive
2. Can fix with DIY ,best choice for house decoration.
3. Embossing texture like real wood or carpet/ marble

Can add IXPE underlayer on the bottom of SPC ? what is main thickness?

Yes,can, normal thickness is 1/1.5mm .

Documents