0CQ Transmission Reducer For The Main Reducer Assembly Of The 2017 Volkswagen Golf BQ1 2.0T Engine

Function: Distributes Haldex-5 AWD torque (50:50 bias) via hypoid gearset (3.68:1 ratio) with integrated e-diff.

Key Features:

• Forged Pinion: Case-hardened steel (HRC 62+) with lapped contact pattern

• Sealed Bearings: Lifetime lubricated (G 052 145 S2 fluid)

• Thermal Sensor: Monitors fluid temp (>130°C triggers TCU protection)

Failure Modes:

• Bearing Brinelling: Impact loads create false brinelling marks (hum at 80km/h+)

• Seal Leaks: Allows fluid migration to Haldex pump (P189C codes)

• Crown Wheel Pitting: Improper run-in causes fatigue spalling

Critical Specs:

1. Backlash: 0.08-0.15mm (requires dial indicator)

2. Pinion preload: 1.0-1.5 Nm rotational torque

Pro Tip: Post-installation, perform 30km run-in with varied speeds – avoids glazing.