Waste Energy Recovery Solution Customized Superheater And Reheater Systems

Waste Energy Recovery Solution Customized Superheater And Reheater Systems

How does a reheater differ from a superheater?

A reheater reheats steam after partial expansion in turbine, while superheater heats saturated steam from boiler drum.

Product Display

Product Functions of Superheater and Reheater

Superheater

1.The function of the superheater in the thermal power plant is to remove the last traces of moisture ( 1 to 2%) from the saturated steam coming out of boiler and to increase its temperature sufficiently above saturation temperature.

2.The super-heating heating raises overall overall cycle efficiency efficiency as well as avoids too much condensation in the last stages of the turbine which avoids the blade erosion.

3.The heat of combustion gases from furnace is utilized for the removal of moisture from steam and to superheat the steam.

4.Super-heaters usually have several tube circuits in parallel with one or more return bends, connected between headers.

Reheater

1.The function of the re-heaters is to resuperheat the partly expanded steam from the turbine.

This is done so that the steam remains dry as far as possible through the last stage of the turbine.

2.Location: Before or after the convective superheater in the convective zone of utility boilers. In modern high pressure boilers, reheaters are generally in two sections.

3.The primary section is placed in the convective zone and secondary section is placed just at the furnace exit hanging from the top.

4.The design consideration for reheaters are similar to those for superheaters.

5.It having same output temperatures but steam pressures are about 20-25% of those in superheaters. Hence lower grade steel alloy can be used for reheaters.

Type Advantages Disadvantages Supporting method

Pendant-type

1.Firm structural support

2. Flow blockage by condensed steam

3. Needs slow restart to purge the water that accumulates in the bottom. supported from above

Inverted-type

1.Proper drainage of the condensed steam

2. Lack the structural rigidity, especially in high speed gas flow Supported from below

Horizontal -type

1. Proper drainage

2. Good structural rigidity.

They do not view the flam directly so they are mainly from the convective type Usually supported in the vertical gas ducts parallel to the main furnace.

Details of Superheater and Reheater

Manufacturing and acceptance criteria of Superheater and Reheater

1.JB/T1611 " Technical specification for manufacturing of boiler pipes."

2.JB/T1612 "boiler pressure test technical conditions. "

3.JB/T1613 "Technical specification for welding of pressure parts of boiler."

4.JB/T1615"Technical specification for painting and packing of boiler."

5. JB/T3375 "Rules for receiving acceptance of materials for boiler construction."

Hua Dong Boiler Co., Ltd. is a high-tech enterprise specialized in manufacturing boilers. Established in early 1985s, has two manufacturing bases, this company covers 400,000㎡ with fixed assets amounting to USD 110,000,000. There are 1100 employees including 150 technicians and 600 coded welders. Hua Dong holds the manufacturing licenses for Grade A boilers and Grade A1&A2 pressure vessels issued by Chinese General Administration of Quality Supervision, Inspection and Quarantine; also it holds the "S" and "U" "NB" stamps issued by American Society of Mechanical Engineers; meanwhile, this Company has passed the certification of ISO9001, SO3834, EN12952 Quality Management System.

"Hua Dong" boilers include Utility Boiler, HRSG Boiler, coal-fired , oil(gas) -fired, coal-water-slurry-fired and garbage-fired steam/hot water boilers, organic heat carrier boilers, etc., and Boiler spare parts (Economizer, Finned tube, Header, Steam drum, Superheater, Water wall panel, Air preheater, Cyclone separator, etc., which are widely used in power generation, heat supply, chemical engineering, textile, food, paper, road building, plastic, rubber and wood working industries. "HD" boilers are honored as "Famous Production in Jiangsu Province", " Jiangsu High-Tech Product" and "Jiangsu Energy-Saving Product". "HD" brand is a "Famous Brand in Jiangsu Province". We are a qualified supplier for the top three boiler manufacturers in China(Harbin Boiler Co., Ltd., Dong Fang Boiler Group Co., Ltd., Shanghai Boiler Works Ltd.,). So far, Hua Dong Boilers have served 10000 customers, which sell well all over China and are exported to USA, Australia, Russia, Kazakhstan, India, Indonesia, South Africa, Brazil, and Southeast Asia.

We strive to manufacture "Safe, Efficient, Energy-Saving and Environment-Friendly" boilers, provide new-type products in excellent quality, serve users sincerely to their satisfaction, and be a top supplier of boilers in China.

Declaration

Zhangjiagang Hua Dong Boiler Co.,Ltd has no subsidiaries. 

Packaging & Shipping

Company Business

Our products have been wildly used in power plants and large international companies overseas.