High Quality 1000 mm x 1000 mm x 1.5 mm Thick Carbon Fiber Plate

High Quality 1000 mm x 1000 mm x 1.5 mm Thick Carbon Fiber Plate

High-quality carbon fiber sheet made from carbon fiber and epoxy resins. The sheet is made from 100% carbon fiber (also known as full carbon), recommended in particular for construction purposes where high bending strength and stiffness are crucial.

Advantages

• Sheet made with advanced infusion technology (in vacuum) that ensures stiffness improved by approximately 30% compared to manually produced sheets.
• Made from high-quality 100% carbon fiber.
• Mirror-like perfect gloss of the top layer.
• Extraordinary appearance, without any defects related to air micro bubbles (pinholes) – widespread in the case of manually produced sheets.
• Low weight – only ~ 2.19 kg (5.35 lb).
• The sheet is cured in production at 50 °C to improve bending strength, stiffness, and thermal resistance up to 70 °C.
• Cut to dimensions with a CNC machining center, which ensures stable and precise dimensions.
• Easily cutting with traditional tools such as a scroll saw, blade, or grinder.

Carbon fiber sheet with two different finishes: one of perfect mirror-like gloss and smoothness and the other is a matt side that is perfect for adhesive bonding.

• Dimensions: 1000 mm x 1000 mm (1 x 1 meter) / 39.4 inch x 39.4 inch.
• Thickness: 1.5 mm / 0.059 inch (+0.2 mm tolerance).
• Thickness tolerance: 0.2mm thickness tolerance ensured by infusion technology. Consequently, the sheet 1.5 mm may be from 1.5 mm to 1.7 mm thick.
• Fiber orientation: 2/2.
• Finish: one-sided gloss, protection against UV, mat reverse side with surface ready for assembly with adhesive bonding.

Features

• Choosing Toray or Tairyfil carbon fiber material, which is from Japan or Taiwan.
• Every carbon fiber Veneer is fabricated with a single layer of high-strength 100% carbon fiber prepreg with 0/90 fiber orientation.
• 45 degrees is available based on your needs.
• Special technology ensures the flawless Gloss on both sides.
• Offer CNC cut service based on your drawing, and sign an NDA agreement to keep the secret of your design.

We are the professional carbon fiber sheets manufacturer in China, the thickness straight carbon fiber sheets plates we can manufacture is more than 60mm. Meanwhile various size can be offered,such as 2'X4' / 4'X8' / 12''X12'' / 24''X24'' / 24''X48'' / 48''X96'' carbon fiber laminated sheets.​All these rigid carbon fiber plate panels can be cut to size based on your requirements.

​

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.