ASTM A179 Longitudinal Weding Fin Tube For Air-Cooled Eat Exchangers And Radiators

ASTM A179 Longitudinal Weding Fin Tube Strength

1. Material Properties: ASTM A179 tubes are made from low-carbon steel, which generally has good weldability. The material's properties, such as tensile strength and yield strength, are important factors in determining the strength of the weld.
2. Welding Process: The welding process used to join the longitudinal seam must be carefully controlled to ensure a strong, defect-free weld. Common welding processes for this type of application include TIG (Tungsten Inert Gas) welding and high-frequency induction welding.
3. Weld Quality: The quality of the weld is paramount. Any defects such as cracks, porosity, or incomplete fusion can significantly reduce the strength of the weld. Non-destructive testing (NDT) methods such as ultrasonic testing or radiography are often used to inspect the weld quality.
4. Heat Affected Zone (HAZ): The heat from the welding process can alter the microstructure of the steel in the heat-affected zone, potentially affecting its mechanical properties. Proper welding techniques and post-weld heat treatment (if necessary) can help mitigate any negative effects on the HAZ.
5. Fin Attachment: The fins are typically attached to the tube by a process such as extrusion or welding. The method of fin attachment must also be strong enough to withstand the operational stresses without compromising the integrity of the tube.
6. Standards and Specifications: The welded fin tubes must meet the relevant standards and specifications for both the base material (ASTM A179) and the welding process. This ensures that the tubes will perform reliably in their intended application.
7. Testing and Certification: The finished tubes should be tested to verify their mechanical properties, including tensile strength, yield strength, and elongation. Certification from the manufacturer or a third-party testing agency can provide assurance that the tubes meet the required specifications.

ASTM A179 Longitudinal Weding Fin Tube Application

1. Heat Exchangers

• Application: ASTM A179 fin tubes are extensively used in shell-and-tube heat exchangers, where they facilitate the transfer of heat between two fluids (e.g., liquid-to-liquid or gas-to-liquid).
• Use Case: In industries such as chemical processing, oil and gas, and power generation, these tubes are used to cool or heat process fluids efficiently.

2. Condensers

• Application: These tubes are commonly used in condensers, where they help convert vapor or steam into liquid by removing heat.
• Use Case: In power plants, refrigeration systems, and air conditioning units, ASTM A179 fin tubes are used to improve condensation efficiency.

3. Boilers

• Application: In boiler systems, fin tubes are used to enhance heat transfer from combustion gases to water or steam.
• Use Case: They are particularly useful in economizers and superheaters, where they help recover waste heat and improve boiler efficiency.

4. Air Coolers and Radiators

• Application: ASTM A179 fin tubes are used in air-cooled heat exchangers and radiators to dissipate heat into the surrounding air.
• Use Case: These are commonly found in automotive, HVAC (Heating, Ventilation, and Air Conditioning), and industrial cooling systems.

5. Refrigeration and Cryogenic Systems

• Application: In refrigeration and cryogenic systems, fin tubes are used to transfer heat between refrigerants and process fluids.
• Use Case: They are used in evaporators, condensers, and chillers in commercial and industrial refrigeration systems.

6. Petrochemical and Oil Refining

• Application: ASTM A179 fin tubes are used in heat recovery systems, preheaters, and coolers in petrochemical and oil refining processes.
• Use Case: They help improve energy efficiency and reduce operational costs in refineries and chemical plants.

7. Power Generation

• Application: In power plants, these tubes are used in heat recovery steam generators (HRSGs), condensers, and other heat transfer equipment.
• Use Case: They play a critical role in improving the efficiency of thermal power plants by recovering waste heat.

8. Marine and Shipbuilding

• Application: ASTM A179 fin tubes are used in marine heat exchangers and condensers for cooling engine systems and other onboard equipment.
• Use Case: They are essential for maintaining optimal operating temperatures in marine engines and systems.

9. Food and Beverage Industry

• Application: In the food and beverage industry, these tubes are used in pasteurizers, sterilizers, and other heat exchange equipment.
• Use Case: They ensure efficient heat transfer while maintaining hygiene and compliance with industry standards.

10. Waste Heat Recovery Systems

• Application: ASTM A179 fin tubes are used in waste heat recovery systems to capture and reuse heat from industrial processes.
• Use Case: They help reduce energy consumption and improve sustainability in manufacturing and processing plants.

​

Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories,  the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always.   The factories already got certificates like : ABS, LR, DNV-GL, BV, KR, CCS, ASME, ISO 9001, ISO14001, ISO18001, ect.

Our factories main products as below : 
Factory 1th: Stainless steel seamless tube, Duplex steel seamless tube, Super duplex steel seamless tube, Nickel alloy steel seamless tube;

Factory 2th: Carbon steel seamless tube, Alloy steel seamless tube; Enhanced Heat Tranfer Tube, low fin tube ,U bending workshop;
Factory 3th: High frequency welding fin tube(HFW fin tube, Solid Fin tube, Studded Tube, Serrated Fin tube, Longitudinal welding fin tube), Wound fin tube(L type fin tube, LL type fin tube,  KL type fin tube), Embedded G type fin tube , Extruded fin tube,  low fin tube, U bend & 180deg. Return;

Yuhong Holding Group also has gained rich experience for project package( products contain:Pipes, Fittings, Flanges, heat exchanger, furnace, fired heater, air cooler, boiler) , YUHONG brand has marked its global presence in more than 85 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand, Singapore, Malasyia, Indonesia, Thailand, Vietnam, Ukraine, Turkey,Sauid Arabia, Qatar, U.A.E,Israel,India, UK, France, Italy, Gernmany, Poland, Spain,... We have successfully implemented the orders of Cross Country Pipelines for our valuable customers. In addition, we have also developed a huge network of contacts and strategic alliances with most important manufacturers as stockists around the world.