Inconel Alloy Wire — 718 Spring Grade for Aerospace & Nuclear

ISO9001 & SGS Certified | Est. 2002 | 12,000 m² Factory | Precision ±0.01mm | 3–7 Day Dispatch

Inconel 718 spring wire from Changzhou DLX Alloy Co., Ltd. is a precipitation-hardenable nickel-chromium-iron alloy wire engineered for springs, fasteners, and high-strength components operating from cryogenic temperatures up to 700°C. Manufactured through multi-pass precision cold drawing with controlled-atmosphere heat treatment, our Inconel 718 wire delivers the fatigue resistance, relaxation resistance, and dimensional consistency required in aerospace, oil & gas, and power generation applications — all with full EN 10204 3.1 MTC traceability on every spool.

Not sure about your heat treatment state? Tell us your coiling process and final service temperature — we recommend solution-annealed or age-hardened delivery condition within 24 hours.

• ±0.01 mm precision — Multi-pass cold drawing with real-time diameter monitoring ensures consistent wire diameter across the entire spool. Eliminates feed variation in automated coiling machines and ensures uniform spring rate batch to batch.
• Choice of delivery condition — Solution-annealed wire for maximum formability during coiling (age harden after forming), or fully age-hardened wire ready for finish grinding. Specify your target hardness or tensile range.
• Full heat-to-spool traceability — Every spool traceable to original heat number with EN 10204 3.1 MTC included as standard. Multi-point quality chain from melting through finished wire inspection under ISO9001.
• Integrated production, not trading — Melting, forging, rolling, multi-pass drawing, controlled-atmosphere annealing, and testing all in-house. No quality gaps from outsourced processing — consistent wire properties spool to spool.
• Surface quality you can coil — Controlled-atmosphere annealing prevents surface oxidation and decarburization. Bright, lubricant-free surface finish ready for your coiling operation — no pre-cleaning required.
• Application-level support — Our metallurgical team reviews your spring design parameters (wire diameter, coil geometry, service temperature, cycle life target) before recommending delivery condition and heat treatment protocol. Engineering partnership, not just wire supply.

Changzhou DLX Alloy Co., Ltd. was founded in 2002 with a single focus: nickel-based specialty alloys. We are not a general wire mill — every drawing die, annealing parameter, and quality checkpoint is designed around nickel alloy wire manufacturing.

• 12,000 m² dedicated facility with integrated melting, forging, rolling, multi-pass drawing, controlled-atmosphere annealing, and testing — wire produced under one roof from ingot to finished spool
• 1,200-ton annual capacity, with automated drawing lines and in-line diameter monitoring that maintain tolerance consistently within ±0.01 mm
• Wire expertise across material families — manufacturing experience spanning nickel alloys, high-temperature alloys, precision alloys, and thermal spray wires means we understand the metallurgy, not just the drawing process
• Five product forms — bar, strip, tube, plate, and wire — enabling integrated supply for customers sourcing multiple product types from a single qualified vendor
• ISO9001 quality management with multi-point traceability; SGS-accredited with BV and TV third-party inspection available

Source: DLX Alloy product catalog. EN 10204 3.1 MTC with full composition included on every shipment.

Solution-annealed wire is optimized for coiling and forming operations. Age hardening can be performed by DLX before delivery or by the customer after forming — we recommend your heat treatment protocol based on your manufacturing process and final spring specification.

Third-party inspection by SGS, BV, or TV available upon request. All shipments fully documented and traceable to heat number.

If you coil or form the wire in-house, order solution-annealed for maximum formability — then age harden after forming. If you need wire ready for finish grinding or minor forming only, order age-hardened. Our technical team can review your manufacturing process and recommend the optimal condition.

Yes. We support trial quantities for first-time buyers to validate wire feed, coiling performance, and post-forming heat treatment response before committing to production volumes.

Yes. Wire can be supplied with full AMS 5832 compliance documentation. EN 10204 3.1 MTC with chemical composition, mechanical properties, and grain size is included as standard.

Our standard bright finish from controlled-atmosphere annealing is ideal for most coiling operations — clean surface, no oxide scale, and no decarburization layer. For specific lubrication requirements, coated finishes are available on request.

Every spool is tested and documented before shipment. In the rare event of non-conformance, we review your spring test data against our MTC and resolve through process adjustment or replacement. Our ISO9001 system requires root cause analysis and corrective action on every claim.