FLUKE 1630-2 FC Ground Clamp 1630-2FC Single Gross Weight 3.000 Kg

Stakeless earth ground loop and ac leakage current clamp for fast, safe indoor/outdoor earth ground resistance and ac leakage current tests. Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes. Stay on line—identify ground loop resistance without the need to disconnect then reconnect the earth electrode from the system. The Fluke 1630-2 FC Stakeless Earth Ground Clamp is the kind of high-quality, rugged tool you expect from Fluke. Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments. Stakeless measurement The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside build ings, on power pylons or anywhere you don’t have access to soil to place auxiliary test stakes. With this test method, a two-process measurement is made around the earth ground wire or bus bar using the specially-designed jaw of the 1630-2 FC clamp. Auxiliary test stakes are not used at all. A known voltage is induced by the source in the clamp, and the current is measured by the sensor in the clamp. The tester auto matically determines the earth loop resistance for this section of the earthing system. FLUKE CONNECT© WIRELESS SYSTE

Specifications Electrical specifications Maximum voltage to earth ground 1000 V Battery type 4 x 1.5 V AA alkaline IEC/EN LR6 Battery life More than 15 hours* Frequency range 40 Hz to 1 kHz Ingress protection IEC/EN 60529: IP30 with jaw closed LCD Digital reading 9999 counts Refresh rate 4/s Temperature Operating-10 °C to +50 °C (14 °F to +122 °F) Storage-20 °C to +60 °C (-4 °F to +140 °F) Operating humidity Non condensing (<10 °C) (< 50 °F) ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]) ≤75 % RH (at 30 °C to 40 °C [86 °F to 104 °F]) ≤45 % RH (at 40 °C to 50 °C [104 °F to 122 °F]) (Non condensing) Altitude Operating 2000 m (6561 ft.) Storage 12,000 m (39370 ft.) Reference temperature 23 °C ±5 °C (73 °F ±9 °F) Temperature coefficient 0.15 % X (specified accuracy)/ °C (<18 °C or >28 °C ([<64.4 °F or >82.4 °F]) Overload indication OL Display Reading Specification with Loop Resistance Standard Input (Ω) Minimum Maximum 0.474 0.417 0.531 0.5 0.443 0.558 10 9.55 10.45 100 96 104.0 Data logging capacity Minimum of 32,760 measurements Data logging interval 1 second to 59 minutes and 59 seconds Safety General IEC/EN 61010-1: Pollution Degree 2 IEC/EN 61557-1 Measurement IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V Current clamp for leakage current measurements IEC/EN 61557-13: Class 2, ≤30 A/m Resistance to Earth IEC/EN 61557-5 Effectiveness of the protective measures IEC/EN 61557-16: cutoff frequency 20 kHz (-3 dB) Electromagnetic compatibility (EMC) International IEC/EN 61326-1: Portable Electromagnetic Environmen

Mengchuan Instrument Co., Ltd. is located in Liushi Town, Yueqing City, Wenzhou, Zhejiang Province, surrounded by the beautiful world natural and cultural heritage - Yandang Mountain! It is mainly engaged in 2000 differential pressure gauge, red oil differential pressure gauge, pressure differential pressure transmitter, liquid level transmitter, diaphragm pressure gauge, shockproof pressure gauge, electric contact pressure gauge, stainless steel pressure gauge, precision pressure gauge, micro pressure capsule gauge, floating ball liquid level gauge, floating ball switch, liquid level controller, intelligent energy gauge, light column gauge and other products. The products are widely used in machinery and civil industries such as plastics, food, printing, chemical industry, petroleum, medical treatment, oven, light textile, printing and dyeing, air conditioning, family and so on.

The company adheres to the business philosophy of "customer first, forge ahead" and adheres to the principle of "customer first" to provide our customers with high-quality services. Welcome!