Lineman Tools 60KN Portable Electric Battery Crimping Tool for Cable

320times

(Cu150mm2)

3-6s

(depend on the size of cable)

1pc

(AC110-240V,50-60Hz)

General features

• The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

• The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

• A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

• Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

• A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.

• The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

① Head rotates 360°

② OLED Display (Crimp Times, Pressure, Voltage)

③ LED Light

④ Emergency Pressure Release Button

⑤ All tools can be controlled by one trigger

⑥ Ergonomic design for one hand operation. Micro computer control system-automatically detect the pressure

⑦ Li-ion lower power weight ratio with 50% more capacity and shorter charging cycles