Electrical Panle For Pole Mount Small Box With Power Distribution and Backup

Main features:

DX-P-150A-50AH wall mounted is used in communication systems with a maximum total capacity of 150A, suitable for wall mounted, floor mounted, pole mounted and other installation methods. It integrates communication power supply, AC/DC distribution, temperature control, monitoring, lightning protection and grounding system functions, and has complete battery management, such as battery low voltage protection function and load shedding function. It can achieve temperature compensation, automatic voltage regulation, current limiting, battery capacity calculation, online battery testing, sleep energy-saving and other functions. Network design of power system, providing multiple communication interfaces such as RS232/RS485 and dry contacts, flexible networking, remote monitoring, and unmanned operation. At the same time, it has a complete lightning protection design for both AC and DC sides, as well as comprehensive fault protection and fault alarm functions. Operate and maintain the front of the power system. The power system is easy to operate, install, and maintain, and is suitable for situations where the power grid fluctuates widely, such as base stations, small and medium-sized exchanges, satellite communications, and data communications

The system input is sent to the rectifier module input through a 63A/2P circuit breaker. Parallel AC C-level lightning protection is used for lightning protection at the input end.

The rectifier module operates in parallel, and its DC output is connected through a busbar to supply two backup battery packs and DC loads. DC loads are controlled by fuses or air switches, providing users with on/off control for each load and protection against overload and short circuits.

Product pictures:

Environmental parameters

Monitoring scheme: Monitor the RS485 ports in the north and south directions, dry contacts, and battery cell detection (optional) all led to the monitoring panel

Operation and maintenance method: Pre maintenance, rectifier module can be hot swappable.