Product Details
Company Profile

12V Din Power Supply Plastic 1.67A 20W AC/DC Input CE UL Listed Industrial Grade

Industrial DIN Power Supply 12V

Introduction

IM-DAC220/DC12V1.67A converts AC220V to DC12V for industrial PoE switches featuring

cost-effective
energy efficient
Universal 85 - 264VAC or 120 - 370VDC Input voltage
Accepts AC or DC input (dual-use of same terminal)
Operating ambient temperature range: -30℃ to +70℃
High efficiency up to 86%, high reliability
DC OK function
Output short circuit, over-current, over-voltage, over-temperature protection
Operating altitude up to 5000m
DIN rail TS-35/7.5 or 15 mountable
Withstand 305VAC input voltage 5S
Safety according to UL/EN/IEC/BS EN62368,UL61010,UL508

With good EMC performance, immunity to noise and reliability, it could ensure stable and continuous operation of the automation system.

Technical Data

Input
Item	Operating Conditions	Min.	Typ.	Max.	Unit
Input Voltage Range	AC input	85		264	VAC
Input Voltage Range	DC input	120		370	VDC
Input Voltage Frequency	AC input	47		63	Hz
Input Current	115VAC			0.55	A
Input Current	230VAC			0.35
Inrush Current	115VAC(Cold Start)		20
Inrush Current	230VAC(Cold Start)		35
Leakage Current	240VAC	＜0.5mA
Hot Plug		Unavailable

Output
Item		Operating Conditions			Min.	Typ.		Max.		Unit
Output Voltage Accuracy		Full load range/48V				±1.0				%
Line Regulation		Rated load				±1.0
Load Regulation		230VAC				±1.0
Minimum Load		0
Ripple & Noise		20MHz bandwidth (peak-to-peak value)				100		120		mV
Temperature Coefficient						±0.03				%/℃
Hold-up Time		115VAC				20				ms
		230VAC				50
DC OK Signal		Output voltage adjustable range ADJ			9-13.5V/40mA
Over-current Protection					≥125% Io, constant current mode, self-recovery
Short Circuit Protection					Constant current mode recovers automatically after fault condition is removed
Over-voltage Protection					≤16.2V	Output voltage hiccup
General
Item			Operating Conditions			Min.	Typ.		Max.	Unit
Isolation Test	Input-		Electric strength test for 1min., leakage current <10mA			4000				VAC
	Input-Output					2000
	Output-					500
Insulation Resistance	Input-		Test voltage: 500VDC			100				MΩ
	Input-Output
	Output-
Operating Temperature						-30			+70	℃
Storage Temperature						-40			+85
Storage Humidity			Non-condensing			10			95	%RH
Operating Humidity						20			90
Switching Frequency			230VAC, 100% load				65			kHz
Power Derating			Operating temperature derating	50℃ to -70℃		2.5				%/℃
			Input voltage derating	85VAC-100VAC		1.33				%/VAC
Safety Standard						Design refer to UL/EN/IEC/BS EN62368-1, UL61010-1, UL508
Safety Class						CLASSI
MTBF			MIL-HDBK-217F@25℃			>300,000h

Mechanical
Case Material	Plastic, heat-resistant (UL94V-0)
Dimension	95.00 x 22.50 x 85.00 mm
Weight	125g (Typ.)
Cooling Method	Free air convection

Testing Standards and Results

Electromagnetic Compatibility
Emissions	CE	CISPR32/EN55032 CLASS B
	RE	CISPR32/EN55032 CLASS B
	Harmonic current	IEC/EN61000-3-2 CLASS A
Immunity	ESD	IEC/EN 61000-4-2 Contact ±6KV/Air ±8KV	perf. Criteria A
	RS	IEC/EN 61000-4-3 10V/m	perf. Criteria A
	EFT	IEC/EN 61000-4-4 ±2KV	perf. Criteria A
	Surge	IEC/EN 61000-4-5 line to line ±2KV/line to ground ±4KV	perf. Criteria A
	CS	IEC/EN61000-4-6 10 Vr.m.s	perf. Criteria A
	PFMF	IEC/EN61000-4-8 30A/m	perf. Criteria A
	Voltage dips short interruptions and voltage variations immunity	IEC/EN61000-4-11 100% dip 1 periods 30% dip 25 periods (50Hz) 30 periods (60Hz)	perf. Criteria B

Note

1.With an AC input voltage between 85-100VAC and a DC input between 120-140VDC the output power must be derated as per the temperature derating curves

2.This product is suitable for applications using natural air cooling

Ordering Options

IM-DAC220/DC12V1.67A	AC220V to DC12V1.67A, 20W, Din Rail Mounted, -30℃～70℃
IM-DAC220/DC24V1A	AC220V to DC24V1A, 24W, Din Rail Mounted, -30℃～70℃
IM-DAC220/DC48V2.5A	AC220V to DC48V2.5A, 120W, Din Rail Mounted, -40℃～70℃
IM-DAC220/DC48V5A	AC220V to DC48V5A, 240W, Din Rail Mounted, -40℃～70℃
IM-DAC220/DC48V10A	AC220V to DC48V10A, 480W, Din Rail Mounted, -40℃～70℃

Product Tags:

1.67A Din Power Supply

AC/DC Input Din Power Supply

20W Din Power Supply

12V Din Power Supply Plastic 1.67A 20W AC/DC Input CE UL Listed Industrial Grade

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Olycom Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Industrial Ethernet Media Converter
Brand Name:	Olycom
Model Number:	IM-DAC220/DC12V1.67A
Certification:	CE UL ISO9001
Place of Origin:	Shenzhen, China
MOQ:	1pc
Price:	Negotiable
Payment Terms:	T/T, PayPal
Supply Ability:	3000Pcs per month
Delivery Time:	3~7 working days
Packaging Details:	1 piece in 1 carton. 125g/pcs
Product Name:	12V Industrial Power Adapter
Input:	85 - 264VAC/120 - 370VDC
Output:	DC12V 1.67A
Power Budget:	20W
Working Temperature:	-30℃ to +70℃