THT Component Wave Soldering Machine SUNEAST E-FLOW-350 DIP Automated Assembly Line

1. Conveyor system:Structure with anti-wearing material for longer lifetime.
2. Preheating system: Optimized hot air circulation, the temperature is more stable and even.
3. Exhausting system:Adopt new concept, seperate design, easy for maintenance.
4. Built-in selective spraying unit(option): through synchronous belt, ball screw, linear guide rail for X and Y direction movement, the step motor will achieve local selection for spraying flux.

• Conveyor:Direct buffering input structure.Stainless steel chain conveyor, durable and special design for aluminum alloy track Adopt segment floating structure to prevent from deformation
• Pre-heatingzones:Designforenergysavingandremovablemodules(drawerdesign).Anycombinationofinfraredandhotairconvection.Use PID control to achieve±2℃accuracy.The temperature variation for pre-heating zone and soldering zone is less than≤5℃
• Flux spraying system:Managed by digital control.The motion of the spray nozzle is controlled by stepper motor Flux supply is controlled automatically for optimized effect.Exhausting and filter system installed on the top
• The solder pot is made by cast iron with anti-corrosion ceramic coating equipped with two low flowrate nozzles
• Aircoolingsystem:coolingrate4-6C/s(adjustable)
• PC+PLC control system.Windows 7 operation system with Chinese/English operation interface.Processing profile and data auto saving function Alarm for detecting the flux and solder level

Main features: E-flow (left to right)3 hot air; heavy-duty double hook-and-claw transmission; tin stove exhaust hood; width of across plate: 50mm-350mm

1. Connection: Linkage type into the plate connection way, aluminum guide, stainless steel chain drive.
2. Transmission system: Equipped with heavy-duty double hook claw, aluminum alloy guide rail anti-deformation structure design; manual adjustment substrate width; transmission angle can be adjusted, configuration, digital angle display; transport speed is controlled by frequency converter, stepless speed.
3. Tin oven system: The tank is made of special cast iron with anti-corrosion treatment, wave crest driven by direct-connected motor, variable frequency speed regulation, tin slag diversion, and oxide reduction device, and manual control of the movement of tin furnace in and out and up and down; External heating device, PID temperature control mode and low level, bit alarm.
4. Spray systems: The spray length can be adjusted automatically, the spray width and speed can be set digitally, and the spray flow rate and the spray particle size can be adjusted by a pressure meter trimmer Constant pressure device supply flux, flux liquid, position alarm and flux auto-add; strong ventilation, filtration system.
5. Preheating system: New Drawer Modular and energy-saving design, three-stage micro-hot air cycle heating, higher thermal efficiency, temperature more uniform. Three section temperature zone, preheating zone length of 1.8 meters, PID temperature control mode.
6. Cooling system: forced up-and-down natural wind cooling.
7. Claw washing device: special brush cleaning.
8. Control system: PC + PLC electrical control system, Chinese and English Windows Operation Interface, data storage and other functions.