| Sign In | Join Free | My benadorassociates.com |
|
| Sign In | Join Free | My benadorassociates.com |
|
| Categories | Sleeve Connector |
|---|---|
| Brand Name: | PJ-625C |
| Connector Type: | 6.35mm Headphone Jack |
| Current Rating: | 1A |
| Model Number: | PJ-625C |
| MOQ: | 300 |
| Voltage Rating (Max): | 50V |
| Description: | 6.35mm Headphone Jack 1A 50V Through Hole |
| Operating Temperature: | -20℃~+70℃ |
| Delivery Time: | 5-6周 |
| Stock: | 3000 |
| Packaging Details: | Through Hole |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This document details the specifications for the HAOYU (HONG KONG) LIMITED 6.35mm Phone Jack (DIP) Series & #6.35@fR=CH 4 | TYPE & BU%E (B). It covers electrical, mechanical, and durability performance characteristics, along with application notes.
| Item | Test Conditions | Specifications | Remarks |
|---|---|---|---|
| 1 - RATING | DC50V 1A | ||
| 2 - OPERATING TEMPERATURE RANGE | -20C~70C | PRESERVATIVE TEMPERATURE RANGE: 15C~35C | |
| 3 - ELECTRICAL PERFORMANCE | CONTACT RESISTANCE | 70m max (at 0.1A DC5V, average of successive measurements) | |
| INSULATION RESISTANCE | 100M min (between terminals and frame, 250V DC for 1 min) | ||
| DIELECTRIC STRENGTH | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC (between terminals and frame, 250V AC for 1 min) | ||
| 4 - MECHANICAL PERFORMANCE | INSERTION AND WITHDRAWAL FORCE | 3 - 40N | Measured across spring piece and matching plug. |
| STRENGTH | 10N (1000gf) for 60 sec. applied to the tip of terminals in any direction of actuator. | Without damage or excessive looseness. | |
| 4C - ATMOSPHERIC CONDITIONS FOR MEASUREMENTS AND TESTS | AMBIENT TEMPERATURE | 15C TO 35C | |
| RELATIVE HUMIDITY | 25% TO 75%RH | ||
| AIR PRESSURE | 80Kpa TO 106Kpa |
| Item | Test Conditions | Specifications | Remarks |
|---|---|---|---|
| 5 - DURABILITY | SOLDERING HEAT TEST (Wave) | Within 3 seconds at 260 5C | Without deformation of case, resistance or excessive looseness of terminals. |
| SOLDERING HEAT TEST (Hand) | Within 3 seconds at 380C or below | ||
| LIFE TEST | 200m max (Contact Resistance) | 5000 cycles at a speed of 30 cycles/min. Electrical characteristics shall be satisfied. | |
| HEAT TEST | 852C for 48 hours, then keep in normal condition for 30 minutes. No damage on appearance. | ||
| HUMIDITY TEST | 402C 90-96%RH for 48 hours, test after keeping in normal condition for 30 min. Mechanical and electrical characteristics shall be satisfied. | ||
| COLD TEST | -402C for 48 hrs. After test keep in normal condition for 30 min. | ||
| SALT SPRAY TEST | 5% NaCl liquor for 24 hours, after washing, keep in normal condition for 30 min. Without excessive corrosion or crack in appearance. |
|
