| Sign In | Join Free | My benadorassociates.com |
|
| Sign In | Join Free | My benadorassociates.com |
|
| Categories | Sleeve Connector |
|---|---|
| Connector Type: | 6.35mm Headphone Jack |
| Description: | 6.35mm Headphone Jack 1A 50V Through Hole |
| Delivery Time: | 5-6周 |
| Brand Name: | PJ-611F |
| Current Rating: | 1A |
| Packaging Details: | Through Hole |
| Voltage Rating (Max): | 50V |
| Operating Temperature: | -20℃~+70℃ |
| Model Number: | PJ-611F |
| MOQ: | 300 |
| Stock: | 3000 |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
Product Name: 6.35 Phone Jack (DIP)
Series: EEALFRY
Model: PI-611
Manufacturer: HAOYU (HONG KONG) LIMITED
Date: 2008-07-23
Description: A 6.35mm phone jack with DIP termination, designed for various electronic applications.
| Item | Description | Test Conditions | Specifications |
|---|---|---|---|
| 1 | RATING | - | DC50V 1A |
| 2 | OPERATING TEMPERATURE RANGE | PRESERVATIVE TEMPERATURE RANGE | -20C ~ 70C | 15C ~ 35C |
| 3A | CONTACT RESISTANCE | Measured by the contact resistance apparatus or meter at 0.1A DC5V. The result is the average of 5 successive measurements. | 70m max |
| 3B | INSULATION RESISTANCE | Between individual terminals and frame. A voltage of 250V DC shall be applied for 1 min. | 100M min |
| 3C | DIELECTRIC STRENGTH | Between individual terminals and frame. A voltage of 250V AC shall be applied for 1 min. | Without damage to parts, arcing or breakdown etc. |
| 4A | INSERTION AND WITHDRAW FORCE | Measured at across spring piece and across matching plug for ergometer. | 3-40N |
| 4B | TERMINAL STRENGTH | A static load of 10 N (1000gf) shall be applied to the tip of the terminals for 60 sec. in any direction. | Electrical characteristics shall be satisfied, without damage or excessive looseness of actuator. |
| 4C | STANDARD ATMOSPHERIC CONDITIONS | Unless otherwise specified. The standard range of atmospheric conditions for making measurements and tests are as follows: Ambient Temperature: 15C to 35C, Relative Humidity: 25% to 75%RH, Air Pressure: 80Kpa to 106Kpa. | - |
| 5A | SOLDERING | Wave-soldering is to be performed within 3 seconds at 260 5C. Hand soldering to be performed within 3 seconds at 380C or below. | Electrical characteristics shall be satisfied. |
| 5B | LIFE TEST | An actuator shall be subject to 5000 cycles at a speed of 30 cycles/min. Pushing force must be parallel to the way of pushing. | Contact resistance shall be 200m max. Mechanical and electrical characteristics shall be satisfied. |
| 5C | HEAT TEST | 852C for 48 hours after test keep in normal condition for 30 minutes. | Appearance, mechanical and electrical characteristics shall be satisfied. |
| 5D | HUMIDITY TEST | 402C 90-96%RH for 48 hours, test after keeping in normal condition for 30 min. | Appearance, mechanical and electrical characteristics shall be satisfied. |
| 5E | COLD TEST | At -402C for 48 hrs. After test keep in normal condition for 30 min. | Appearance, mechanical and electrical characteristics shall be satisfied. |
| 5F | SALT SPRAY TEST | At 5% NaCl liquor for 24 hours, after washing, keep in normal condition for 30 min. | Without excessive corrosion or crack in appearance. |
|
