| General | Applicable PC board thickness | 1.2mm~1.6mm |
| Temperature Range | -25~85 |
| Rated Voltage | 250V AC/DC |
| Rated Current | 2A |
| Insulation Resistance | 1000M |
| Dielectric Strength | 800V AC/minute |
| Material & Finish | Terminal (Contact) | Phosphor bronze, Thickness 0.15mm, Tin Plating: 3~4m |
| Housing (Plastic Shell) | Nylon66 UL94V-0, Color: White |
| Contact (Pin) | Phosphor bronze, Thickness 0.30mm, Tin Plating: 3~4m |
| Opening Wafer (Plastic Shell) | Nylon46 UL94V-0, Color: Beige |
| Contact (Pin) | Phosphor bronze, Thickness 0.30mm, Gold Plating: 3~4m |
| Lips Wafer (Plastic Shell) | PBT UL94V-0, Color: White |
| Contact (Pin) | Phosphor bronze, Thickness 0.30mm, Tin Plating: 3~4m |
| Solder tabs | Phosphor bronze, Thickness 0.25mm, Tin Plating: 3~4m |
| Tiepian Wafer (Plastic Shell) | Nylon46 UL94V-0, Color: Beige |
| Electrical Performance | Male contact Retention force | 10N per pin |
| Female contact Retention force | 10N per pin |
| Plug-in force | 3N per pin |
| Plug-out force | 0.5N per pin |
| Contact Resistance | 10m |
| Endurance Characteristics | Soldering rest (Time/Temp/Area) | 2.50.5S / 2505 / 95% |
| Resistance to soldering Heat (Time/Temp/Appearance) | 51S / 2505 / No Damage |
| Heat test (Time/Temp/Appearance/Contact Resistance) | 96h / +853 / No Damage / 20m |
| Cold test (Time/Temp/Appearance/Contact Resistance) | 48h / -253 / No Damage / 20m |
| Temperature Cycling (Cycles/Temp/Appearance/Contact Resistance) | 5 cycles / Low: -253, High: 853 / No Damage / 20m |
| lnvariab lenes humidity (Temp/RH/Time/Appearance/Contact
Resistance/Insulation Resistance) | 602 / 90%-96% RH / 96h / No Damage / 20m / 100M |
| Salt Spray (Concentration/Temp/Time/Appearance/Contact Resistance) | 51% / 352 / 162h / No Damage / 20m |
