10L Combined Granulator Mixer Machine Double Leaf Rotor Type

Custom 10L Low Energy Consumption Combined Mixer-Granulator

Product brief introduction

The parts of this mixer that come into contact with the materials (mixing chamber/side plate/pressure hammer/mixing blade shaft) are made of all-alloy materials (no need for spraying or electroplating). They are suitable for stirring, dispersing and mixing metal powders and other formulations such as binders within a certain temperature. When the materials become a mud mass, they are extruded and granulated after a certain period of time before proceeding to the next process.

Technical Data

Working Principle of Internal Mixer

The two rotors in the mixing chamber rotate relative to each other under a certain speed ratio, clamping the material from the feeding port and bringing it into the roller gap to be squeezed and sheared by the rotors. After passing through the roller gap, it hits the sharp edge of the mixing chamber "W" and is divided into two parts, respectively along the gap between the front and rear chamber walls and the rotors and then returns to the top of the rotor. In the closed mixing chamber, the material is strongly sheared and mixed under certain pressure and temperature conditions, so that the formula materials are fully dispersed and plasticized, so that the formula can play the best effect.

Mixing System

The mixing chamber is "W" shaped, and adopts an "M" shaped lower pressure cover to form a fully enclosed mixing space. The stirring blade adopts a prismatic spiral design without dead angles, so that the material shearing and dispersion can meet the physical property requirements. The stirring blade is a hollow structure, and the part in contact with the material (mixing chamber/side plate/pressure hammer/stirring blade shaft) is made of full alloy material (no need for spraying or electroplating), which is wear-resistant, corrosion-resistant, not easy to stick to the material, and has a long service life.

Product Superiority

1. The motor and electrical components adopt a fully sealed structure, which is waterproof and dustproof.
2. The oil outlet is equipped with a pressure gauge, which automatically alarms when the pressure is too high.
3. The oil storage tank is out of oil.
4. The oil filling operation cycle-the single oil filling time can be set on the control panel.

5.A dust and odor-proof collection shield is installed above the mixing tank, with an air outlet to facilitate the connection of the factory dust collection system, effectively reducing the harm of dust and harmful gases to operators.

6.Thermal insulation system.

After-sales Service

During normal use, non-consumable parts are guaranteed for one year. We provide on-site installation guidance and long-term technical support.
Note: Electrical components and motors are imported from Taiwan and foreign brands.

COMPANY PROFILE
Guangdong CFine Technology Co.,Ltd. is amanufacturer that specialized in designing,R&D,manufacturing, selling and maintain theplastic ,rubber, powder metallurgy mixing and granulating equipments. We have very professional R&D team to meet the special requirements of customers, tocustom-made the machine. We have strong technical strength, full range ofadvanced equipments and well- trained manufacturing team, together with modern management mode, convenient and swift after-sale service, thus our machines are sold all over the world, obtained accordant appreciation by theclients and we had established long-term and stable relationships of cooperation.
Quality first, service uppermost is ourguideline. Honesty and integrity,innovation contribution is our principle.C Fine is becoming the most professionaland influential manufacturer in this industry, CFine brand is most popularin Chinaand also available to the world in the near future.