Wall Mounted Ozone Concentration Analyzer Ultraviolet For Continuous Measurement

Wall-mounted Ozone Concentration Analyzer-The Ultraviolet Method Can Be Used For Continuous Measurement

1. Product profile
OZONE-300 LN series fixed ozone analyzer is designed and manufactured according to the verification and calibration method of the national environmental standard of the People's Republic of China-ultraviolet photometry method, and "ozone and ozone Generator for Water Treatment" of the Ministry of Construction of the People's Republic of China. The current ozone concentration is calculated by measuring the change of optical signal intensity before and after the absorption of ultraviolet light. Equipment using advanced double light road ultraviolet light source system, equipped with lamp intelligent management system, after boot can make the ultraviolet lamp quickly to measurement status, using foreign separation light pool technology, equipment has no leakage, high pressure resistance, large flow sampling gas impact, easy to clean, easy maintenance, simple operation, low use cost, etc. It is mainly used for continuous detection of ozone gas in various industrial environments, and can also be used for detection of ozone gas in pipelines, containers and other environments in operation. Widely used in pharmaceutical, chemical, municipal, sewage treatment and other industries, the ozone generator export concentration and ozone generator output measurement.

The ozone analyzer has a touch screen operation interface to display the concentration of ozone gas in real time, with pressure and temperature compensation and display, and can set the automatic zero calibration time and manual zero calibration mode.high concentration (g/Nm3) Range is equipped with flow input function, which can display the output of ozone generator in real time. With two sets of relay signal output, the user can freely choose the high alarm point and low alarm point signal output connection. The core component adopts ultraviolet long life light source system and high light transmittance quartz sheet to ensure the stability of zero point and prevent zero point drift from affecting the accuracy of detection concentration. According to the independent optical tank structure of pressure resistant and impact resistant designed by foreign optical tank technology, the gas flow, pressure and flow rate remain unchanged during the zero operation, so as to prevent the impact of the air zero. The zero operation can be completed without closing the ozone intake, ensuring that the equipment can run continuously for 24 hours a day.
Application fields: ozone generator manufacturers, municipal water industry, industrial sewage industry, fine chemical industry food and drinking water industry, space disinfection industry, swimming pool disinfection industry, essence synthesis industry and other ozone generator industry.

2. Product characteristics
Test method: dual-light path ultraviolet light absorption method, long-life light source system, high measurement accuracy.
Measurement principle: according to the Lambert-Beer law, accurate measurement through the luminosity absorption principle.
Light source system: foreign long-life ultraviolet light source system (wavelength 253.7nm), free warranty for 3 years.
Usage mode: indoor installation and use, equipped with power supply and signal terminals.
Optical pool system: separated optical pool technology, no leakage, high pressure resistance, large flow rate sampling gas impact.
Intelligent compensation: built-in temperature and pressure compensation and display, with light source automatic compensation function.
Operation mode: the user can select the manual zero calibration and automatic zero calibration according to the running status, and the automatic zero calibration time can be set.
Display units: g / Nm 3, mg / NL,% WT, ppm, mg / Nm 3 are optional.
Data display: high-definition color touch screen, high concentration range set into the gas mass flow rate, real-time display of output.
Output function: 4-20 mA, RS485 communication, two groups of alarm point output, electronic flowmeter input, etc.
Standard configuration: anti-corrosion flowmeter, ozone exhaust destroyer, air intake filter.

OZONE-300 LN series stationary ozone analyzer, optional range and working mode.

3.Qualification

Model: OZONE-300 LN series

Measuring range: 0-300g / Nm³Built-in customizable

Optional range: 0-200g / Nm³,0-100g/Nm³,0-50g/Nm³,0-1000ppm,

Light source life: about 30,000-50,000 hours;

Sampling method: positive pressure sampling, negative pressure sampling (optional);

Display interface: 4.3-inch touch screen operation interface;

Content interface: ozone concentration, temperature, and pressure;

Auxiliary functions: temperature compensation, pressure compensation;

Display unit: g / Nm³,mg/NL,%WT,ppm ,mg/Nm³selectable;

Display resolution: 0.01 g/m³,0.01ppm;

Gas flow rate: 0.5L±0.2L/min;

Input pressure: <0.1MPa;

Concentration error: maximum 0.3%FS;

Linear error: maximum 0.2%FS;

Zero-point drift: <± 0.3%.FS；

Reaction time: 0.03 seconds, 0.3 seconds;

Ambient temperature: -20~50℃;

Line interface mode: quick twist (stainless steel);

Tandem sample diameter: Φ 8 (8mm * 6mm) (optional);

Bypass sampling diameter: Φ 6 (6mm * 4mm);

Communication mode: RS-485;

Output mode: 4-20 mA (active);

Telecom signal: high alarm point following electrical signal, low alarm point following electrical signal;

Power supply: AC 110-220V;

Dimensions: 230mm (height) 330mm (W) 150mm (deep);

Note: 1 mg/L = 1 g/m3 = 467 PPM;

Free warranty: 24 months (host);

Note: Standard configuration (built-in): flowmeter, ozone tail gas catalyst, air intake filter.

OZONE-300 LN series fixed ozone analyzer-positive pressure sampling connection process

     Shenzhen Wanyi Technology Co., Ltd. is located in Guangming District, Shenzhen, a high-tech city with convenient transportation and beautiful scenery. Wanyi Technology was established in 2011, based on the promulgation of the first "Indoor Air Quality Law" in China. Shenzhen Wanyi Technology Co., Ltd. integrates R&D, sales, after-sales service and technical consultation. It has passed ISO9001 quality management system certification, ISO14001 environmental management system certification, and its products have obtained CMA, CE, ERP, metrology and other certifications. It also drafted the enterprise standard for "Negative Ion Detector", and participated in local and national standards such as "Air Ion Detector", "Observation Methods for Air Negative Ions", "Indoor Environmental Comfort Detector", "Performance Testing Specifications for Air Negative Ion Measuring Instruments", and "Radiation Dosimeter". In 2019, it was awarded the "High-tech Enterprise Certificate". Through years of accumulation of technology and service experience, the two major brands under Wanyi Technology, "ONETEST" and "CESTSEN", have been widely recognized by customers in the fields of negative oxygen ion monitoring, dust concentration detectors, radiation detectors, and gas detectors.

    The main products developed by Wanyi Technology include: environmental air quality monitoring instruments, atmospheric environmental freshness index monitoring systems, negative ion detectors, negative ion sensors, dust detectors, gas detectors, gas detection modules, radiation detectors, radon gas detectors, etc., fully meeting the needs of environmental monitoring. At present, tens of thousands of our company's products have been put on the market and are applied in fields such as environmental monitoring, forestry meteorology, university research, work safety, disease control, medical care, and chemical engineering. All the equipment is operating well, with accurate measurements and simple and convenient use, and has received unanimous praise from customers! Wanyi Technology's mission is to take the research and development of air quality monitoring instruments as its responsibility and contribute to the beautiful ecological Chinese Dream! The company attaches great importance to talent cultivation and team building, adhering to the development philosophy of professionalism, dedication, pragmatism and focus. It adheres to the service principle of putting customers first and prioritizing credit. With its own technical service advantages and standardized services, it is dedicated to solving customers' urgent and practical needs. It provides one-stop solutions for customers with superior products and advanced technologies. To build intelligent monitoring, safe production, and scientific research and development! Wanyi Technology sincerely invites customers and friends from all industries to cooperate and achieve win-win results with an open and pragmatic attitude!