Home > Air Conditioners >

30Ton cooling water tower for cooling molds and hydraulic oil systems of injection molding machines

Categories	Cooling Towers
Brand Name:	SZAGS
Model Number:	30Ton
Place of Origin:	China
MOQ:	1
Price:	Negotiation
Payment Terms:	T/T
Delivery Time:	15 days
Packaging Details:	Plywood case
Cooling capacity:	117000kcal/h
Nominal flow:	23.4m3/h
Power:	220~480V／3P／50~60Hz
Height × diameter(H×φ):	2400×1500mm

Contact Now

Add to Cart

Company Info.

Shenzhen Anges Machinery Co., Ltd

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Product Details
Company Profile

30Ton cooling water tower for cooling molds and hydraulic oil systems of injection molding machines

60tons cooling tower technical parameters

Model		STG-30
Basic parameter	Type	Counter current circular cooling tower
	Nominal flow	23.4m³/h
	Inlet/outlet temperature	37℃／32℃
	Dry-bulb temperature	31.5℃
	Wet-bulb temperature	27℃
	Cooling capacity	117000kcal/h
	Noise (dB(A))	60dB(A)
	Power	220~480V／3P／50~60Hz
	Water quality	PH＝6 to 8
	N.W／G.W	116kg／530kg
Fan	Fan type	Axial Flow
	Cooling air flow(m3/h)	14040m³/h
	Rotation speed(r/min)	710r/min
	Diameter	770 mm
	Quantity	4 pieces/set
	Electronic box	Water proof type
	Power	0.75kw
	Start-up mode	Direct start
Size	Height × diameter(H×φ)	2400×1500mm
	Inlet pipe caliber	80mm
	Outlet pipe caliber	80mm
	Full outlet/drain off pipe caliber	25mm／25mm
	water supply pipe caliber	15mm
Material	Sprinkler	P.V.C-U
	Casing	Fiberglass
	Water basin	Fiberglass
	Fan	A.B.S.
	Electronic box	Water proof type
	In -fill	P.V.C.
	Shelf	Hot-dip galvanized steel

WORKING PRINCIPLE

A cooling tower is designed to remove heat from a building or
facility by spraying water down through the tower to exchange heat
into the inside of the building. Air comes in from the sides of the
tower and passes through the falling water.
A cooling tower is a device that rejects waste heat to the
atmosphere through the cooling of a coolant stream, usually a water
stream to a lower temperature.
Cooling towers may either use the evaporation of water to remove
process heat and cool the working fluid to near the wet-bulb air
temperature or, in the case of dry cooling towers, rely solely on
air to cool the working fluid to near the dry-bulb air temperature
using radiators.

Advantages

Tower body temperature weight: reduce the design requirements for
the foundation and installation costs.
The cooling water volume of the tower can be adjusted: for a given
type of cold water tower, with working water pressure change (that
is, flow change) in and out of the water temperature difference is
generally unchanged, so you can increase the water supply pressure
method to improve the cooling water volume of the tower (within the
scope of the spray device), but also can change the nozzle aperture
method to adjust the tower water volume and temperature drop.
No plugging, no maintenance, stable and reliable operation. A
series of phenomena that affect the performance of the tower and
process system equipment such as the plugging of the packing column
due to the impurities in the circulating water, the aging of the
packing, the deformation, the brittle-cracking, the plugging and
flushing of the sprinkler head, the plugging of the packing
brittle-chip in the pipeline, the pump and the heat exchanger are
completely eliminated. It completely eliminates the trouble of
frequent cleaning, replacement of filler and spray nozzle
Main Features
Small floating water rate: the spray device is evenly distributed
in the tower, and the outlet area is about twice as large as that
of the traditional power tower, so the wind speed is small. At the
same time, the top of the tower is installed with excellent
performance of the water collection device, which minimizes the
amount of floating water, and eliminates a lot of water refill.
​ Good cooling effect: the hot water in the tower exchanges heat
with the incoming air under the condition of mist. Due to the small
wind resistance in the tower and the reasonable design of air duct
and wind blade, the ratio of air to water is improved.
Common applications include cooling the circulating water used in
oil refineries, petrochemical and other chemical plants, thermal
power stations, nuclear power stations and HVAC systems for cooling
buildings. The classification is based on the type of air induction into the
tower: the main types of cooling towers are natural draft and
induced draft cooling towers.

Product Tags:

30Ton cooling water tower

cooling tower for injection molding machines

hydraulic oil cooling water tower

30Ton cooling water tower for cooling molds and hydraulic oil systems of injection molding machines

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Anges Machinery Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

30Ton cooling water tower for cooling molds and hydraulic oil systems of injection molding machines

30Ton cooling water tower for cooling molds and hydraulic oil systems of injection molding machines

30Ton cooling water tower for cooling molds and hydraulic oil systems of injection molding machines

WORKING PRINCIPLE

A cooling tower is designed to remove heat from a building or facility by spraying water down through the tower to exchange heat into the inside of the building. Air comes in from the sides of the tower and passes through the falling water.

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream to a lower temperature.

Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature using radiators.

Advantages

Tower body temperature weight: reduce the design requirements for the foundation and installation costs.

Main Features

​ Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.

30Ton cooling water tower

cooling tower for injection molding machines

hydraulic oil cooling water tower

30Ton cooling water tower for cooling molds and hydraulic oil systems of injection molding machines

Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.