1000FT Cat5e F / UTP LSZH 24AWG Extend To 350MHz Bare Solid Copper
High Speed Network Lan Cable
Quick Detail:
· Bare solid copper conductor
· 100MHz
· Aluminum foil shielding
· Jacket PVC, 60P, -20~75℃
· Ratetemperature:60℃ 75℃
· InstallationTemperature: -30℃-+50℃
· CompliestoANSI/TIA-568-B.2&IS0/EC11801
· CE, RoHS, TUV, UL compliant, CPR, ETL, RCM, ISO9001
Description:
1. This Cat5e FTP shielded network cable provides 100MHz bandwidth
and a transmission rate of 100Mbps within a range of 90 meters.
Capable of handling network transmission requirements below 100Mbps
effectively.
2. This product is used for shielding and confidentiality systems
with certain requirements for electromagnetic interference, and is
used for indoor horizontal work area wiring and indoor LAN wiring.
3. This product uses high-quality oxygen free copper as the
transmission conductor, which has reliable and excellent electrical
transmission performance, reaching and greatly exceeding the
indicators of Category 5e systems.
4. The outer shell of this Cat5e FTP LSZH shielded network cable is
wrapped in low smoke and halogen-free LSZH material, which will not
produce a large amount of smoke and toxic gases in case of fire,
and has high safety.
5. This Category 5e FTP LSZH shielded network cable has strong
anti-interference ability and can be used in environments that
require electromagnetic interference resistance. The overall
shielding system has certain signal shielding and confidentiality.
Specifications:
| Product Description: Cat 5e F/UTP 4 X 2 X 24AWG LSZH |
| Rev.: A | ECN Description: |
| Construction Item Description | Electrical Property |
Conductor |
Material | Bare Solid Copper(elongation: 19 ~ 24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m |
| OD | 24 AWG | Resistance unbalance within a pair | ≤ 2% |
Insulation |
Material |
HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a
DC voltage between 100 & 500V |
>1500 MΩ / 100m |
| OD | 0.90 ± 0.01 mm | Mutual capacitance | 5600 pF / 100m MAX |
| Average THK | 0.20 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m |
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ± 15 Ω |
| 2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown |
| 3p: white + 2 green stripes & green | Mechanical Property |
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% |
Pair Twist |
Lay & Direction | 1p: S=20.0 mm (28%) | tensile strength before aging | ≥12 MPa |
| 2p: S=17.5 mm (24%)) | elongation after aging | ≥ 150 % |
| 3p: S=22.0 mm (32%) | tensile strength after aging | ≥10.5 MPa |
| 4p: S=15.5 mm (21%) |
jacket | elongation before aging | ≥ 125 % |
| OD | / | tensile strength before aging | ≥ 12 MPa |
Inner Assemble | Lay | S=90 ± 5 mm | elongation after aging | ≥ 100 % |
| Direction | according to the drawing | tensile strength after aging | ≥ 100 MPa |
| Filler | / | Packing |
| OD | / | Drum | NA |
| Filler | Ripcord | 300D | Master Carton | NA |
| Drain Wire | Tinned Copper | |
Outside Shield | Shield | Shield |
| Construction | / |
| Material | Polyester/Aluminium (PET/ALU) |
| Coverage | ≥ 115% |
Jacket | Material | LSZH, 60P, -20~75℃ |
| Hardness | 81 ± 3 |
| OD | 5.2 ± 0.15 |
| Average THK | 0.45 ~ 0.55 |
Color | white |
| Marking Color | black |
| Marking | according to the customer's requirements |
| Electrical Properties |
| Conductor Resistance at 20°C | NF EN 50289-1-2 / IEC 60189-1 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | NF EN 50289-1-2/ IEC 60708 | ≤ 2% |
Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage
(cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
NF EN 50289-1-3 / IEC 61196-1-105 |
No breakdown |
| Insulation Resistance at 20°C after 2min of electrification under a
DC voltage between 100 & 500V |
NF EN 50289-1-4 / IEC 60885-1 |
>1500 MΩ / 100m |
| Mutual capacitance | NF EN 50289-1-5 /IEC 60189-1 | 5600pF / 100m MAX |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | NF EN 50289-1-5 / IEC 60189-1 | ≤ 160 pF / 100m |
| Characteristic impedance at 100MHz | NF EN 50289-1-11/ IEC 61156-1 | 100 ± 15 Ω |
| Spark Test | UL444 | 2000 ± 250VOC |
| Transmission Properties |
| CAT5e ANSI/TIA-568.2-D; IEC 61156-6; YD/T1019-2013 |
No. |
Frequency |
Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) |
Return Loss (Min) |
NEXT (Min) |
PS NEXT (Min) |
EL-FEXT (Min) |
PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) |
| 1 | 4 | 4.05 | 552 | 45 | 23.01 | 56.27 | 53.27 | 51.96 | 48.96 |
| 2 | 8 | 5.77 | 546.73 | 45 | 24.52 | 51.75 | 48.75 | 45.94 | 42.94 |
| 3 | 10 | 6.47 | 545.38 | 45 | 25 | 50.3 | 47.3 | 44 | 41 |
| 4 | 16 | 8.25 | 543 | 45 | 25 | 47.24 | 44.24 | 39.92 | 36.92 |
| 5 | 20 | 9.27 | 542.05 | 45 | 25 | 45.78 | 42.78 | 37.98 | 34.98 |
| 6 | 25 | 10.42 | 541.2 | 45 | 24.32 | 44.33 | 41.33 | 36.04 | 33.04 |
| 7 | 31.25 | 11.72 | 540.44 | 45 | 23.64 | 42.88 | 39.88 | 34.1 | 31.1 |
| 8 | 50 | 15.07 | 539.09 | 45 | 22.21 | 39.82 | 36.82 | 30.02 | 27.02 |
| 9 | 62.5 | 16.99 | 538.55 | 45 | 21.54 | 38.36 | 35.36 | 28.08 | 25.08 |
| 10 | 100 | 21.98 | 537.6 | 45 | 20.11 | 35.3 | 32.3 | 24 | 21 |
| 11 | | | | | | | | | |
| 12 | | | | | | | | | |
| 13 | | | | | | | | | |
| 14 | | | | | | | | | |
| Remarks: ＊ are the reference values |
Notices:
1. Open the packaging, check the products carefully, and take them
gently.
2. Please strictly follow the wiring standards during construction,
and do not tie or excessively bend the network cables.
3. When making RJ45 network cable connectors, please follow the
T568B or T568A standards to ensure the correct wire sequence and
avoid problems such as disconnected lines or unstable network
connections.
4.It is best to use a single network cable at a distance of no more
than 100 meters to ensure optimal transmission performance.
5. Ensure that the shielded network cable is grounded during
installation.
Applications:
CAT5E FTP LSZH Network Cable is a high-performance network
transmission medium widely used in various situations that require
high bandwidth, low interference, and good fire resistance. The
following is a detailed description of the product:
The Cat5e FTP LSZH Network Cable combines the advantages of
Category 5e transmission performance and low smoke and halogen-free
environmental protection features, while adding a shielding layer
to improve anti-interference ability. It is suitable for high-speed
network applications such as Gigabit Ethernet and 10/100BaseT, and
is an ideal choice for data centers, office areas, public
transportation systems, and other places.
FAQ
UL/CE/RoHS/ETL/CPR Certificate Shielded Lan cable Cat5e F/UTP LSZH
24AWG Extend To 350MHz Bare Solid Copper
Q1. Can I order samples of Lan cables?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,15-45 days for mass production.
Q3. Do you have a minimum order quantity limit for network cable
orders?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea, which usually takes about 7 days to
arrive.
Q5. How to proceed an order for network cable?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q6.Is it OK to print my logo on network cable product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 10 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less than 0.2%.
Secondly, for individual defective products, we will remedy them as
soon as possible and send them to you, or we can discuss solutions
based on the actual situation to achieve 100% satisfaction for you.
