420-760mm Width Pressure Plastic Thermoforming Equipment Touch Screen Operation

HX 76HS Pressure Thermoforming Machine Servo Precision Pull Tab

Product Description:

Various types of films (PVC, PP, PE, POF, PPT, PTGF, APET, ABS, OPP, PS, PET, etc.) can be vacuum molded into plastic covers of different shapes through different molds, such as toys, hardware, food, electronics, pharmaceuticals, daily necessities, clothing, as well as ceiling panels, wall panels, cake boxes, automotive materials, and sanitary materials with three-dimensional relief patterns, forming exquisite inner lining and outer packaging, making products refreshing and improving competitiveness.

Main Features:
1. Power saving
(1) Electric furnace touch screen control, one key adjustment, one key heating, displaying the actual center temperature inside the furnace, and checking the stability of the electric furnace.
(2) Quick preheating: using insulation and energy-saving heating bricks, the electric furnace can quickly preheat for 2 minutes, and then wait for 3-5 minutes for the heating bricks to maintain a constant temperature, which can be used for production (preheating the old electric furnace for about 20 minutes), shortening the waiting time for startup preheating and improving work efficiency;
(3) Electric furnace misalignment adjustment: Some width sheets can be misaligned to adjust the electric furnace, turn off a row of heating bricks, and save one-sixth of electricity.

2. Save materials
(1) Servo motor pull tab: The pull tab speed is fast and accurate, reducing material and electrical energy losses and improving product quality;
(2) Double row needle chain transmission, stable high-speed operation, flexible length and width adjustment device, precise installation, allowing the machine to maximize the use of film. Customized sheets only need to add 2.5-3cm more material (traditional machines 4-5CM) according to the size of the mold plate that has been arranged. Calculated based on the mold plate width of 600mm, it saves 1/60 of the material compared to traditional machines. If one machine produces 180 tons of material per year, it can save 3 tons of sheet material per year.

3. Efficient
(1) Servo molding and pulling: The production speed is at least 15-20% faster than traditional cylinder machines.
(2) Adopting a 2P large drum motor, the drum is enlarged by 12 inches and can be flipped for cleaning. The cold air is larger and cools faster, increasing production efficiency by at least 10%.
(3) This machine adopts a special high-strength wear-resistant aluminum body iron core girder, the service life of the iron girder, the cooling effect of the aluminum girder, and the girder and mold plate are equipped with a water cooling device and high-speed cold water spray, so as to speed up the molding speed and ensure the molding quality, and the production speed is twice as fast as that of the traditional machine.

4. Hot air blowing function (optional)
Special products can be equipped with a hot air blowing system to make the overall thickness of the vacuum-formed product more uniform and greatly reduce water marks; Cold mold function, reducing the problem of PVC foam shell over masking caused by too fast PVC vacuum forming speed.
5. Data storage
This machine is controlled by a servo PLC touch screen. During the first normal production of the product, only the parameters during the production process need to be stored through the PLC. When customers place repeated orders in the future, the previously stored production parameters can be recalled, and 1-2 sheets of adjustment materials can be adjusted, which reduces material waste during adjustment and enables rapid production.

Machine Parameters:

            Hengxing Company was established in 1999. It is one of the earliest manufacturers of blister machines in China. We

mainly produce full-automatic positive and negative pressure multi-station Suction thermoforming machines and high-frequency machines. Blister packaging-related equipment and so on.

           Our products are exported to countries worldwide. For example, in Southeast Asian, Mexico, and South Africa,  our machinereceived high praise from customers. The products we manufacture meet environmental production standards. For example,Cornstarch lunch boxes. We also offer overseas repair services. We will support you in all aspects of technology and qualityafter-sales. We have a complete set of technical team and a one-stop service

.