Underground Cable Fault Locator with Remote Control Spiking Tool

The cable spiker is a special equipment, mainly used for further destructive identification of cables after cable identification and before sawing.

In the process of power cable construction, when migrating and repairing the laid cables, it is often necessary to saw off the relevant cables. In order to ensure the operator's personal safety foolproof. First of all, it is necessary to judge whether the relevant cables on site are live or not. Only after confirmation can the relevant cables be sawed off.

The method of absolutely confirming whether the cable is live is currently only the method of short-circuiting the cable relative to the ground or relative to the phase by mechanical puncture.

The cable stabbing device adopts a remote control/automatic piercing device, which can damage and pierce the relevant cables once on site. If the cable is electrified, the cable will explode when punctured, otherwise the cable will not be electrified.

Product Parameters

Cable Spiker
Recognition method: Judging by the swing direction ofthe hands
Jaw:中125mm
Power: 1.5kVA(intermittent momentary)
Weight: 11.00kg
Dimensions:430X360X225mm
Signal sending frequency: Min: 0.4Hz, Max: 1Hz (range adjustable)

Features:

1. When the angle between the two guns is not 120°, at least one gun body can achieve the purpose of stabbing and form a short circuit point;

2. Use wired + wireless remote control method to control, and can be remotely controlled through the wall;

3. Both AC and DC, built-in lithium battery pack and large-capacity energy storage device, long charging time;

5. Small size and light weight, very suitable for outdoor use. Technical Parameters

Nail specification table:Nail specification table

Bullet power table:

Standard configuration: 50 rounds of S1 red (power level 5) bullets, 50 rounds of PS57C8 nails

Operation interface introduction

1. Grounding: grounding point of the instrument, safety protection;

2. Output 1: used to connect to the shooter body;

3. Output 2: used to connect to the shooter body;

4. Charging: DC12V charging port, connect to a 12V charger to start charging;

5. Switch: turn on/off the working power;

6. Indicator light 1: when output 1 is working, the indicator light is on;

7. Indicator light 2: when output 2 is working, the indicator light is on;

8. Power indicator: when the built-in battery is working, it indicates the battery power in real time.

1. Controller: control the shooter to carry out the cable puncture action process;
2. Remote control: The two buttons (A.B) of the remote control correspond to output 1 and output 2 of the controller;
3. Bullet: Loaded into the chamber when stabbing;
4. Shooting nails: put them into the nail tube when stabbing;
5. Shooter
6. Output line: the connection line between the controller and the shooter;
7. Ground wire: the connection wire between the shooter and the ground drill;
8. Ground drill: Generally, there is no formal grounding point on site, so find a reliable ground to insert;
9. Screwdriver, socket, test tube brush: accessories for cleaning the shooter;
10. Power cord (charger): Control box charging cable.

Xi'an Xu&Hui Electromechanical Technology Co., Ltd. /Xian XZH Electric Power Technology Co., Ltd. has found in 2013, located in Xi'an, China. which is a highly experienced team dedicated to developing electrical measurement instrument, the product line covers a wide range of devices for testing various electrical area, such as underground cable fault locating system, power transformer test, AC/DC Hipot test, Insulation resistance test and so on. With rich measurement experiences of innovation combining and advanced technology to provide the most reliable electrical measurement.

The design development production and Inspection is performed at the ISO 9001 and CE which gurantee a consistency of high quality products. XZH TEST masters a variety of technologies as well as extended service and support to deliver the highest value to our customers.

We sincerely hold the tenet of "quality first, customers supreme, honor commitment trust worthy".Stays commitment R&D about electric power detection equipment and electric power automation, since its foundation, the company keeps living up to the belief of: "Create high-quality brand, casting first-class enterprise image". Also, we make the "steady development, the best quality "as the core concept of the enterprise.

Our goal is to provide our customers with reliable test and measurement equipment that more safe and easy to use, we make measurement easier!

Xi'an Xu & Hui Electromechanical Technology Co., Ltd expect to strengthen the relationship with world-wide cooperators, and warm-heartedly welcoming business partners to visit our factory for developing the OEM & ODM win-win Cooperation.

Our Team

Factory scene

Training is a core course for all the members and we will organize various trainings to help us to improve our abilities and Let us find the beauty of life. We treasure the time we are learning and studying together.

Services

  We have the ability to innovate new products and technologies.

  We can provide complete system solutions for your project.    

  We provide online and offline practical and theoretical training.

  We provide instrument repair and calibration.

Certification