IP68 90KW Flowrider Surf Simulator Indoor Machine Customized

The surfing simulator is a professional-level entertainment device that generates continuous waves through intense water flow. The product is based on a blue water body, with white artificial waves as the core. It is complemented by a wooden fence and safety protection design, recreating the thrilling sensation of real ocean surfing. Whether you are a beginner or an expert surfer, you can experience the perfect combination of balance control and speed excitement here. It is suitable for use in water parks, sports centers, commercial complexes, and other venues.

The wooden-colored fence of the surfing simulator has anti-slip edge designs to prevent collision risks; anti-slip pads and safety officer monitoring points are set up around (as shown in the fence structure in the picture).

The water depth of the surfing simulator is strictly controlled within the safe range, and the emergency braking system can stop the water flow within 3 seconds.

The surfing simulator equipment seamlessly integrates with the water park environment (as shown in the background slide and the red and blue roof buildings in the picture), and can operate independently or serve as the core project of the theme area. Supports switching between single-player and multiplayer modes

• Water park extreme sports area
• Sports center surfing training base
• Outdoor interactive project of commercial complex

Single pump 90KW Dimensions: 5-6 meters * 15 meters (width * length)

Double pump 90KW Dimensions: 8-9 meters * 15 meters (width * length)

1. Single pump flow rate: 3000 - 4000 m3/h, head: 7 - 3.5 m
2. Submersible axial flow pump 600QZ-70-90kW, 8-pole motor, speed 740 r/min
3. Voltage levels: 380V, 660V, 3KV, 6KV, 10KV
4. Protection level: IP68
5. Insulation level: F class, H class
6. Water tank depth: 1.1 meters

1. Sand tank Q650, Q = 16.5 m/h, pipe diameter interface 50mm PVC pipe, requires 750KG of quartz sand.
2. Water pump AS100, Q = 18 m/h, 0.75KW, maximum head = 12m, pipe diameter interface 50mm PVC pipe.
3. Filter material 1-2Mm/
4. All-plastic flow-through sterilizer UV2T-P, UV2T-P. 220V, Q = 2m3/h, lamp tube configuration 1 root 30W. Interface size 1 inch. Working pressure 0.6Mpa, height (mm):
5. Automatic dosing bucket can achieve automatic dosing, economical and convenient