HT Sensor 10VDC Power HT15V Silicon Pressure Sensor Level Sensor
Cell 15mm Pressure Sensor Core
HT15V Silicon Piezoresistive Pressure SensorIntroduction:
HT15V is a silicon piezoresistive pressure sensor featuring a
highly stable diffused silicon element core. It employs the
piezoresistive effect of diffused silicon for precise measurement
of both liquid and gas pressures. This sensor finds extensive usage
in various applications, including air compressors and
refrigeration systems .Product Features:- Utilizes advanced technology and is encapsulated in a 316L
stainless steel housing
- Wide measuring range 0~350KPa~60MpaS
- High reliability and excellent stability
- Constant voltage supply
Applications:- Suitable for measuring non-corrosive gas and liquid pressure with
316L stainless steel compatibility
- Compact design, ideal for applications with limited space
- Used in process control systems for monitoring and controlling
pressure
- Commonly used in refrigeration systems and air compressors for
pressure measurement
Electrical performance:- Power Supply: ≤10VDC
- Common Mode Voltage Output: 50% of the input (typical)
- Input Impedance:4KΩ~20KΩ
- Output Impedance:2.5KΩ~6KΩ
- Electrical Connection:100mm high-temperature wire,ribbon cable
| Performance Parameters: |
| Measurement Range | Gauge(G) | 350KPa,1000KPa,2000Kpa |
| Absolute(A) | 350KPaA,700KPaA,1000KPaA,2000KPaA |
| Sealed(S) | 3500KPaS,7MPaS,10MPaS,20MPaS |
| Typ | Max | Unit |
| NonLinearity | ±0.15 | ±0.3 | %F.S |
| Repeatability | 0.05 | 0.1 | %F.S |
| Hysteresis | 0.05 | 0.1 | %F.S |
| Zero Offset Output | 0±1 | 0±2 | mV |
| Full Scale Output | 100±1 | 100±2 | mV | |
| Zero Offset Temp. Drift | ±0.8 | ±2 | %F.S | |
| Full Scale Temp. Drift | ±0.8 | ±2 | %F.S | |
| Compensated Temp. | 0~70 | ºC | |
| Operating Temperature | -20~80 | ºC | |
| Storage Temperature | -40~125 | ºC | |
| Allowable Overload | Take the smaller value between 3 times the full scale or 80MPa | | |
| Burst Pressure | 5X the full scale | | |
| Long-term Stability | 0.2 % | F.S/Year | |
| Diaphragm Material | 316L | | |
| Insulation Resistance | ≥200MΩ 100VDC | | |
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | | |
| Shock | 100g,11ms | | |
| Response Time | ≤1ms | | |
| O-ring Seal | Nitrile rubber or Fluoro rubber | | |
| Filling Medium | Silicon Oil | | |
| Weight | ~20g | | |
| The parameters are tested under the following conditions: 10V @25ºC | |
| Outline Construction |
| Dimension |  |
| Electrical connection and compensation |
|
1. Pay attention to the fit between the core size and the
transmitter housing during assembly to achieve the required air tightness
2. During the assembly of the housing, ensure it is aligned
vertically and apply even pressure to avoid jamming or damaging the
compensation plate.
3. If the measured medium is not compatible with the core diaphragm
and the housing material (316L), special instructions should be
provided when placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects
to prevent damage to the core due to diaphragm deformation or
piercing.
5. Keep the pressure port of the gauge pressure core open to the
atmosphere and prevent the entry of water, water vapor, or
corrosive media into the core negative pressure chamber.
6. If there are any changes to the pin leads, follow the label on
the actual core for reference.
1. Q: What are the key features of your pressure sensor
transmitters?
A: Our transmitters are characterized by high precision, long-term
durability, and reliable performance. Customization options are
available to meet specific application requirements.
2. Q: Can I request special specifications?
A: Yes, we support both OEM and ODM services. Our engineering team
can tailor solutions based on your technical and operational needs.
3. Q: What is your monthly production capacity?
A: We have the capacity to produce up to 30,000 units per month,
which enables us to support large-volume orders. To ensure optimal
scheduling, we recommend coordinating with our sales team in
advance.
4. Q: What is the typical delivery lead time?
A: Standard models are typically delivered within 5–8 working days.
Lead times for customized products may vary depending on
specifications.
5. Q: What is your pricing structure? Are volume discounts
available?
A: We offer competitive pricing with attractive discounts for bulk
purchases and long-term partnership agreements.
6. Q: What are your warranty and after-sales support policies?
A: All products come with a 24-month warranty from the date of
shipment. Our after-sales team guarantees a response within 24
hours and provides remote assistance via PC-based connectivity when
needed.
HT20V Diffused Silicon Pressure Sensor 10VDC Piezoresistive Differential Pressure Sensor Cell
