P25-31.25mm Large Spacing High Permeability Outdoor Advertising LED Display with 2K-4K Resolution and Die Cast Aluminum Box

Product Features:

1. Pixel spacing: 25mm horizontally and 31.25mm vertically, pixel composition: 1R1G1B arranged in a zigzag pattern to increase color mixing effect and avoid color cast display from different perspectives;

2. Resolution ≥ 1280dot/㎡;

3. Module size: width 500mm x height 250mm, box size: width 1000mm x height 500mm;

4. Driving mode: static constant current;

5. Brightness: ≥ 6000cd/㎡;

6. Module: composed of unit modules;

7. Protection: The protection level should not be lower than IP65 before and after (high protection performance, long service life);

8. The light transmittance can reach 60%, the fan free air conditioner has natural heat dissipation performance, and low air resistance;

9. Free splicing of right angles and arcs, seamless splicing of 90 degrees on all four sides, and splicing of ± radians;

10. Box body: Die cast aluminum (one-piece molding) box body with a left and right angle of 45 degrees. The box body is made of high-strength die cast aluminum body, with light weight and high strength as a single unit, supporting curved and right angle installation;

11. Material of power control box: die cast aluminum (integrated molding), power distribution board with 4-channel power supply;

12. Signal and Power Supply: Integrated Signal and Power Supply Cable, Injection Molding Process;

13. Face mask: Anti glare face mask, with good ink consistency and a sun hat;

14. Weight: ≤ 18kg/㎡

15. Maintenance method: Supports front and rear maintenance, easy disassembly and maintenance;

16. System protection: It has moisture-proof, dust-proof, can adapt to general harsh weather, anti-corrosion, anti-static, lightning protection, earthquake resistance, and the system has smoke alarm and over temperature alarm functions; Electrical protection: equipped with overcurrent, short circuit, overvoltage, and undervoltage protection functions;