The Embedded Touch Screen Self-service Terminal is a
professional-grade display device specifically designed for
self-service terminals, intelligent cabinets, and industrial
control cabinets. Utilizing an embedded installation method, it
delivers a clean and aesthetically pleasing setup where the display
area sits flush with the cabinet panel. This achieves an integrated
equipment front panel, enhancing both the industrial aesthetics and
operational convenience. It serves as a key component in the
upgrade and transformation of modern intelligent terminals.
The product adopts a fanless silent design, operating with zero
noise during use, significantly reducing acoustic interference.
This makes it suitable for environments with high requirements for
quietness. Even under prolonged high-load operation, it maintains
stable system performance, effectively extending the equipment's
service life.
Structurally, the embedded installation is implemented from inside
the cabinet outward, with only the display area exposed externally.
The narrower bezel and higher screen-to-body ratio not only save
space but also enhance visual immersion and interaction efficiency
during use.
The front panel of the screen features an industrial-grade
protective design, offering excellent dustproof, waterproof, and
scratch-resistant capabilities. It can withstand minor physical
impacts and environmental dust intrusion, ensuring stable operation
in various complex working conditions.
In terms of hardware, it is equipped with an industrial-grade
motherboard that supports 24/7 uninterrupted operation. Its
powerful and stable performance meets the stringent requirements
for high reliability and low failure rates in various industrial
and commercial terminal applications.
The system boasts strong compatibility, supporting mainstream
operating platforms such as Windows and Linux, and facilitates
integration with multiple control systems and configuration
software.
| LCD Panel Parameters | Screen Size | 17 Inch |
| Display Area | 337.92 mm.(Height) X 270.34(Width)mm. |
| Aspect Ratio | 16 : 9 |
| LCD Type | a-Si TFT-LCD Monitor |
| Maximum Resolution | 1280 X 1024 |
| Display Color | 16.7M , 72% NTSC |
| Brightness | 250cd/m² |
| Contrast Ratio | 1200 : 1 |
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) |
| Response Time | 20ms |
| LCD Panel Lifespan (Hours) | 60,000(Hour.) |
| Field Frequency | 60Hertz |
| PCAP Touchscreen Panel Parameters | Touch Pattern | Projected Capacitive Touchscreen Monitor |
| Touch Points | 10 Points |
| Cover Glass | Physical toughened Morse magnitude 7 explosion-proof |
| Glass 3 mm. Optical mount to reduce parallax |
| Glass Transmission | >85% (Higher light transmission depends on glass coating
technology For example AR/AG) >85% |
| Response Speed | < 6ms |
| Touch Accuracy | More than 90% of the touch area ±2 mm |
| Touch Method | Inch Stylus |
| Output Format | Coordinate Output |
| Click Time | Unlimited |
| Smallest Touch Size | 5 mm |
| Long-lasting Durability | Yes, Available |
| Touch Interface | USB |
| Operating Temperature and Humidity | Below 10℃ ~ +50℃, ≤ 85%RH |
| Storage Temperature and Humidity | Less than 20℃ ~ +60℃, ≤ 90%RH |
Audio Parameters
(External Speaker Option) | Audio system | Stereo |
| Speaker size | ≈ 99 x 45 x 20 mm |
| Impedance | 8 Ohm |
| Power | 2 x 5 Watt |
| Loudness | > 80 Decibel |
| Interface | 4-pin connector |
| Onboard Interface | HDMI Input | 1 |
| VGA Input | 1 |
| DVI Input | 1 |
| USB Type B or any desired USB Type | 1 |
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz |
| Maximum Power Loss | ≤ 30 Watt |
| Standby Mode Power Loss | < 1 Watt |
| Features | Operating Temperature | 0℃ ~ 50℃ |
| Storage Temperature | Below 10℃ ~ +60℃ |
| Accessories | Power Cord Length | 1.5m |
| HDMI Cable Length | 2m |
| USB-A to USB-B Cable Length | 1.5m |
| Stereo Speaker Size with Connector | 99*45*20mm. |
| Stereo Speaker Length | 1.5m |
| Package Size | Device Dimensions | 380 X 318 X 49mm. |
| Net Weight | 5.5 Kilogram |
| Package Size | 45 X 38.5 X 15Centimeter |
| Gross Package Weight per Unit | 6 Kilogram |
The Embedded Touch Screen Self-service Terminal is widely used in
self-service terminals, information kiosks, data acquisition
cabinets, industrial control cabinets, smart parcel lockers, and
other fields. It is an ideal solution for enhancing equipment
intelligence and user interaction experience.
if you would like to get the specification about above product, or
you hope to discuss your requirements or need any additional
information on our this product , then please do not hesitate to
send us a inquiry and contact our sales team now.
21.5 Inch Windows Commercial Touchscreen Digital Ordering Kiosks Machine For Fast Food and Milk Tea Shops
