QH-GA Automatic Obstacle Avoidance Tube Laser Cutting Machine Semi-Automatic Loading Beveling Cutting

Semi-Automatic Loading Adapts to Bevel Batch Flexibility: Unlike fully automatic systems requiring complex calibration for small-batch beveling, semi-automatic loading lets operators quickly switch between tube types (e.g., Φ100mm round to 200×200mm square) with minimal setup. The auto-alignment function ensures this flexibility doesn’t compromise bevel precision—tubes are positioned to ±0.03mm in seconds, keeping pace with 1.5g acceleration for consistent batch bevel quality.

Beveling Cutting Eliminates Weld Prep Downtime: By integrating beveling directly into tube cutting, the machine eliminates traditional secondary beveling steps (grinding/milling), reducing overall tube processing time by 40%-50%. For example, a 6500mm-long Φ200mm carbon steel tube (10mm wall) can be cut and beveled in 12-15 minutes—vs. 25+ minutes with separate cutting and beveling machines.

High Speed + Precision = Uniform Bevel Edges: Even at 1.5g acceleration, the side-mounted chuck’s stable clamping and ±0.03mm positioning accuracy prevent tube shift during beveling. This ensures bevel angles (adjustable 0°-45°) remain consistent across the entire tube length (e.g., ±0.5° angle deviation for 6500mm tubes), critical for tight weld joint fit-up in structural applications.

Cost-Effective Weld-Ready Processing: Semi-automatic loading avoids the high cost of fully automatic material handling, while integrated beveling eliminates the need for dedicated beveling equipment. For small-to-medium workshops, this means accessing industrial-grade beveled tube processing (up to 120 beveled tubes per shift) at a lower total equipment cost—delivering better value than combining separate cutters, bevelers, and full-auto loaders.