Round Square Tube Cutting Machine Horizontally Mounted Lathe Semi Automatic Loading

Semi-automatic Loading Core: Automates tube alignment/clamping (cuts manual setup time by 30%-40%); adapts to QH-GZ (heavy-tube focus) and QH-GS-6012 (compact, multi-thickness) variants.​

Shared Key Specs: Φ15-500mm round/15×15-500×500mm square tubes; 5500-6500mm length; ±0.03mm accuracy; QH-GZ: 6000W-20KW/2T, QH-GS-6012:1500W-20KW/1.7T.​

Fit: Batch tube processing (machinery/pipelines); semi-auto loading reduces labor intensity vs. fully manual machines.

Semi-automatic Loading Boosts Batch Efficiency: Unlike fully manual loaders that require 2-3 minutes per tube for alignment/clamping, the system cuts setup time to 40-60 seconds per tube. For a batch of 50×6500mm Φ300mm round tubes, this reduces total loading time from ~125 minutes (manual) to ~50 minutes—critical for meeting high-volume production targets, especially with QH-GZ’s thick-wall tube focus (where manual handling of heavy tubes slows workflows further).​

Reduces Labor Intensity & Error Risk: The semi-automatic system automates heavy/awkward tube positioning (e.g., 6500mm-long 25mm-thick carbon steel tubes for QH-GZ), eliminating manual lifting (which reduces worker fatigue and injury risk by 50%+). It also ensures consistent alignment: manual loading often causes ±0.1mm deviations (leading to scrap), while the semi-auto system maintains alignment within ±0.03mm (matching the machine’s positioning accuracy) and cuts scrap rates by 25%-35%.​

Variant-specific Loading Adaptability: QH-GZ’s semi-automatic loader features reinforced clamping for heavy tubes (up to 120kg/m, common in oil pipelines), preventing slippage during high-power (12KW-20KW) cutting. QH-GS-6012’s compact semi-auto design uses a space-saving lateral feeding mechanism, fitting workshops with narrow aisles (8500mm length vs. QH-GZ’s 9620mm) while still handling large-diameter tubes—offering flexibility for diverse workshop layouts.​

Power-Tube Compatibility Enhanced by Semi-auto Loading: Both models’ semi-automatic systems align tubes to match their power ranges: QH-GZ (6000W-20KW) loads thick-wall tubes (10-25mm) with precision for deep-penetration cuts, while QH-GS-6012 (1500W-20KW) handles thin (0.5-5mm) to thick tubes, with the loader adjusting clamping force to avoid damaging delicate thin tubes. This synergy ensures the machine’s power potential is fully utilized without compromising cut quality, unlike manual loading which often misaligns tubes for high-power processing.